Lincoln Electric RANGER 3PHASE SVM207-A Service Manual page 23

B-5
PROCESS
STICK
WIRE FEED, LN-25 WITH
INTERNAL CONTACTOR
TIG, TIG MODULE WITH
WITH CONTACTOR KIT
CONTROL CABLE, & ARC
START SWITCH
WIRE FEED, LN-15
ACROSS the ARC
(has internal contactor)
OPERATION
SUMMARY OF WELDING PROCESSES
CONTROL
CABLE IDLE
USED MODE
No AUTO
No AUTO
Yes High
No Auto
RANGER® 3 PHASE
ELECTRODE
WHEN NOT TO START
WELDING
Hot Touch electrode to work.
Welding starts immediately
and engine goes to high
idle.
Cold Press gun trigger, LN-25
contactor closes. Welding
starts immediately and
engine goes to high idle.
NOTE: Output Control
must be set above "3"
Cold Press Arc Start Switch
contactor closes,
welding starts immediately.
Cold Press gun trigger.
LN-15 contactor closes,
Welding starts immediately
NOTE: Output Control must be
set above "3" on the dial.
B-5
WELDING