Maintenance; Safety Precautions; Routine And Periodic Maintenance; Engine Maintenance - Lincoln Electric RANGER 250 SVM150-A Service Manual

Lincoln electric welder user manual
Table of Contents

Advertisement

D-2

SAFETY PRECAUTIONS

WARNING
• Have qualified personnel do all maintenance and
troubleshooting work.
• Turn the engine off before working inside the
machine.
• Remove guards only when necessary to perform
maintenance and replace them when the mainte-
nance requiring their removal is complete. If guards
are missing from the machine, obtain replacements
from a Lincoln Distributor. (See Operating Manual
Parts List.)
Read the Safety Precautions in the front of this manu-
al and in the Engine Owner's Manual before working
on this machine.
Keep all equipment safety guards, covers, and devices
in position and in good repair. Keep your hands, hair,
clothing, and tools away from the fans, and all other
moving parts when starting, operating, or repairing the
equipment.
TABLE D.1 – KOHLER ENGINE MAINTENANCE SCHEDULE
FREQUENCY
Daily or Before
Starting Engine
5 Hours
Every 25 Hours
Every 100 Hours
Every 200 Hours
Every 2 Years
1
Service more frequently when used in dusty areas and/or at high ambient temperatures.

MAINTENANCE

ROUTINE AND PERIODIC
MAINTENANCE

ENGINE MAINTENANCE

To prevent the engine from accidentally starting, dis-
connect the spark plug leads before servicing the
engine.
See Table D.1 (Kohler engine) or D.2 (Onan Engine)
for a summary of maintenance intervals for the items
listed in Table D.3. Follow either the hourly or the cal-
endar intervals, whichever comes first. More frequent
servicing may be required, depending on your specific
application and operating conditions. See Figure D.1
for major component locations.
At the end of each day's use, refill the fuel tank to min-
imize moisture condensation in the tank. Running out
of fuel tends to draw dirt into the fuel system. Also,
check the crankcase oil level and add oil if indicated.
MAINTENANCE REQUIRED
• Fill fuel tank
• Check oil level
• Check air cleaner for dirty, loose, or damaged parts
• Check air intake and cooling areas, clean as necessary
• First Oil Change
• Service air pre-cleaner
• Change engine oil
1
• Replace fuel filter element
• Clean or replace air filter element
• Clean spark arrestor
• Replace oil filter
1
• Check spark plug and gap
• Check fuel lines and clamps
RANGER 250
CAUTION
1
D-2

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ranger 250

Table of Contents