Lincoln Electric RANGER 250 SVM150-A Service Manual page 108

F-58
OUTPUT RECTIFIER BRIDGE AND CHOKE
REMOVAL AND REPLACEMENT (continued)
RECTIFIER/CHOKE
MOUNTING BRACKET
TOP
W1
CENTER
W2
W3
BOTTOM
W4
W5
W10
REMOVAL PROCEDURE
Refer to Figure F.25.
Output Rectifier
1. Turn the engine off.
2. Perform the Case Cover Removal procedure.
3. Perform the Power Module Capacitor
Discharge procedure.
TROUBLESHOOTING & REPAIR
FIGURE F.25 – OUTPUT RECTIFIER BRIDGE DETAILS
W6
W7
W11
W8
W9
ENGINE
CHOKE
CABLE
KNOB
FRONT
PANEL
RANGER 250
OUTPUT
RECTIFIER
CHOKE
4. Note the position of the engine choke cable
for reassembly purposes. Using the 5/16" nut
driver, remove the clamp holding the engine
choke cable to the choke control lever at the
carburetor. Flex the cable outward to free it
from the lever.
F-58
BASE