Helpful Tips; Height Adjustment - Shark Slim Light Liftaway NV340UK Owner's Manual

DUST-AWAY
™ MICROFIBRE PAD
1 Slip two of the tabs between the suction nozzle and the duster base and attach them to the front fasteners on the base. Then pull the other two tabs tightly around
HARD FLOOR
to the back fasteners on the base. For best results, ensure that the pad is flat against the bottom surface and secured tightly.
ATTACHMENT &
2
Use the Dust-Away
CLEANING PADS
to work with the Dust-Away
INSTRUCTIONS
3 Wash the pads separately with warm water either in the washing machine or by hand using liquid detergent.
Do not use bleach or fabric softeners as they may damage or leave a coating that will reduce the cleaning performance of the pads.
Tumble dry low or line dry to extend the life of the microfibre fabric.
For best floor cleaning results, we recommend replacing your microfibre pads every 3-4 months following normal use.
SUCTION CONTROL
1 This unit is equipped with a suction control
collar to help with push and pull on high pile
carpets, area rugs and to release suction when
dusting delicate objects or drapery. Located
at base of top handle, rotate the collar 90° to
minimise suction. Be sure to close again for

HELPFUL TIPS

maximum suction.
POWER BUTTONS
2
The POWER button turns on suction only. This is
ideal for use on bare floors, delicate area rugs
and for use with accessories.
1
1 0
™ to clean dry bare floor surfaces. Do not use to clean damp floors or wet/sticky messes. Only use pads provided by Shark
™ attachment.
3
CORD HOOKS
4
HEADLIGHTS
5
2
3
The BRUSHROLL button spins the floor brush,
ideal for use on carpeted surfaces. Note: The
floor brush will only spin once the vacuum is
reclined back.
For quick cord access, rotate upper hook
180° and remove cord. Rotate it back for cord
storage.
Designed to illuminate debris in dark areas, the
headlights illuminate any time the power is on.
The headlights are long-lasting and designed to
last the life of the vacuum.
5
4
® , which are designed

HEIGHT ADJUSTMENT

6 This floor nozzle has been optimised to work
on all types of carpets as well as bare floors
so there is never any need to adjust heights for
different surfaces.
FILTERS
7
Remember to clean your filters regularly under
normal use. Also, for optimal performance, tap
clean filters between washes as needed.
7