Retest After Repair - Lincoln Electric PRO-CUT SVM146-A Service Manual

F-57 F-57
TROUBLESHOOTING & REPAIR

RETEST AFTER REPAIR

Should a machine under test be rejected for any reason requiring the removal of any mechanical part that could
affect the machine's electrical characteristics, or if any electrical components are repaired or replaced, the
machine must be retested.
INPUT IDLE AMPS AND WATTS
Input Volts/Hertz Idle Amps Idle Watts
208/230/460 0.61 140
Output Current Range 35 - 85 Amps
Maximum Open Circuit Voltage 335 Volts
PRO-CUT 80