Case Rear Components - Lincoln Electric PRECISION TIG SVM186-A Service Manual

B-6

CASE REAR COMPONENTS

3
2
1. INPUT CABLE– This #6-3 (208/230V) or #12-3
(380V and higher) heavy duty cable with cable
clamp is factory installed on all models. The
Domestic models (208/230V) also are equipped with
a NEMA 6-50P plug.
2. GAS INPUT CONNECTOR – This is a 5/8-18 right-
hand thread female fitting for connection of input gas
supply.
3. COOLING AIR VENTS – Air is drawn in through the
upper vents and exhausted out through the lower
vents. The louver baffle steers exhaust air down and
prevents it from re-entering the upper vents.
4. MACHINE RATING PLATE
5. RECEPTACLE AND CIRCUIT BREAKER-115vac
auxiliary NEMA 6-20R .
OPERATION
FIGURE B.2
PRECISION TIG® 225
B-6
4
5
1