RX-V2700/DSP-AX2700
I DISASSEMBLY PROCEDURES
(Remove parts in the order as numbered.)
Disconnect the power cable from the AC outlet.
1. Removal of Top Cover
a. Remove 2 screws (1), 4 screws (2) and 5 screws (3).
(Fig. 1)
b. Slide the top cover rearward to remove it. (Fig. 1)
2. Removal of Front Panel
Remove 6 screws (4) and then remove the front panel
forward. (Fig. 1)
3. Removal of Sub Chassis Unit
a. Remove 3 screws (5) and then remove the frame top.
(Fig.2)
b. Remove 4 push rivets (6) and then remove the side
plates L/R. (Fig. 2)
c. Remove 1 screw (7), 2 screws (8) and 3 screws (9).
(Fig. 2)
d. Remove CB12, CB805–807, CB814, CB970 and CB971.
(Fig. 3)
e. Remove the sub chassis unit forward. (Fig. 2)
12
2
4
4
1
2
4
3
Top cover
1
Front panel
Fig. 1
5
6
7
8
3
3
2
9