Skoda Fabia Operating Instructions Manual page 189

Details about removing the holder - if needed - are given in each lamp replace-
ment description .
Removing
›
Unclip the container nozzle
A
» Fig. 196.
›
Insert a finger into the recess
in the direction of arrow .
C 3
›
Remove the holder of the container nozzle in the direction of arrow
Fitting
›
Slide the holder of the container nozzle in the opposite direction to the ar-
row » Fig. 196.
4
The holder must engage firmly.
›
Push the container nozzle into the holder in the opposite direction to the ar-
row .
1
Replacing the low beam and high beam bulb (halogen headlights)
Fig. 197 Replacing the bulb for low beam and main beam

Read and observe and
›
Remove the relevant cover in the front wheel arch
To replace lamp, first remove the bracket of the wash water container nozzle
in the right headlight » page 185.
›
Remove the protective cap » Fig. 194
B
›
Press the connector latch and remove the plug connector by jiggling in the
direction of arrow » Fig. 197.
1
›
Push in the spring in the direction of the arrow
›
Release the spring in the direction of the arrow
186
Do-it-yourself
from the holder in the direction of arrow
in the direction of arrow and lift the catch
B 2
on page 184 first.
» page 185.
on page 185.
2
.
3
›
Remove the defective bulb in the direction of arrow
›
Fit a new bulb into the headlamp and secure the spring in the opposite direc-
tion to the arrow
›
Insert the plug in the opposite direction to the arrow
1
›
Fit protective cap
After changing the lamp in the right headlamp, replace the holder of the wash
water container nozzle
.
4 ›
Replace the appropriate cover in the front wheel arch
Change bulb for turn signal switch (halogen headlight)

Read and observe
Remove the holder of the wash water container nozzle before replacing the
lamp in the right headlight
›
Remove the protective cap
›
Turn the socket with the bulb in the direction of arrow
›
Remove the socket with the bulb in the direction of arrow
›
Insert the socket with the new bulb in the opposite direction to the arrow
›
Turn the socket with the new bulb in the opposite direction to the arrow
until it stops.
›
Fit protective cap
.
3
» Fig. 194 on page 185.
B
» page 185.
Fig. 198
Changing the bulb for the front
turn signal light
and on page 184 first.
» page 185.
» Fig. 194 on page 185.
C
» Fig. 194 on page 185.
C
.
4
.
1
» page 185.
» Fig. 198.
1
.
2
.
2
1