Replacing the windscreen wiper blades
Fig. 188 Windscreen wiper blade
Read and observe
on page 179 first.
Adjust the windscreen wiper arms to the service position before replacing the
windscreen wiper blades.
Adjusting service position for changing wiper blades
›
Close the bonnet.
›
Switch the ignition on and off again.
›
Push the windscreen wiper lever to position
Windscreen wipers and washers.
›
Hold the lever in this position for about 2 seconds.
Move the windscreen wiper arms into the service position.
Removing the wiper blade
›
Lift the wiper arm from the window in the direction of the arrow
» Fig.
188.
›
Tilt the wiper blade to the stop in the same direction.
›
Hold the upper part of the wiper arm and press the securing mechanism
in the direction of arrow
.
2
›
Remove the wiper blade in the direction of the arrow
Fitting the wiper blade
›
Push the wiper blade in the opposite direction of the arrow
intoo place.
›
Check that the wiper blade is correctly attached.
›
Fold the wiper arm back to the windscreen.
›
Turn on the ignition and press the lever into position
screen wipers and washers.
180
Do-it-yourself
within 10 seconds
» page
67,
4
1
A
.
3
until it locks
3
» page
67, Wind-
4
Move the windscreen wiper arms into the home position.
Replacing the rear window wiper blade
Fig. 189 Rear window wiper blade
Read and observe
on page 179 first.
Removing the wiper blade
›
Lift the wiper arm from the window in the direction of the arrow
» Fig.
189.
›
Tilt the wiper blade to the stop in the same direction.
›
Hold the upper part of the wiper arm and press the securing mechanism
in the direction of arrow
.
2
›
Remove the wiper blade in the direction of the arrow
Fitting the wiper blade
›
Push the wiper blade in the opposite direction of the arrow
into place.
›
Check that the wiper blade is correctly attached.
›
Fold the wiper arm back to the windscreen.
1
A
.
3
until it locks
3