Vf Set Menu - Sony PMW-EX3 Operating Instructions Manual

VF SET Menu

VF SET
Menu items
VF
Setting the
viewfinder
Peaking
Setting the peaking
function for the
viewfinder
Marker
Setting the
markers added to
pictures in the
viewfinder
Zebra
Setting the zebra
pattern
120
Setup Menu List
Subitems and setting values Contents
Color
–99 to +99 (±0)
Mode
Color / B&W
Type
Normal / Color
Color
White / Red / Yellow / Blue
Frequency
Normal / High
Setting
On / Off
Safety Zone
On / Off
Safety Area
80% / 90% / 92.5% / 95%
Center Marker
On / Off
Aspect Marker
On / Off
Aspect Select
4:3 / 13:9 / 14:9 / 15:9
Guide Frame
On / Off
Zebra Select
1 / 2 / Both
Zebra1 Level
50 to 107 (70)
Adjust the color of pictures in the viewfinder.
Select the display mode of the viewfinder.
Color: Color mode
B&W: Monochrome mode
Select the circuit to be used for the peaking function.
Normal: To use the VF DETAIL circuit of the viewfinder
Color: To use the peaking circuit of the camcorder
When you select "Color" for "Type," select the color of the
peaking signal.
When you select "Nornal" for "Type," select the frequency to
be detected by the VF DETAIL circuit.
Turn all marker indications on/off in combination.
Turn the safety marker on/off.
Select the size (ratio to the entire screen) of the safety zone
marker.
Turn the center marker on/off.
Turn the aspect marker on/off.
Select the type of the aspect marker.
Turn the guide frame marker on/off.
Select the zebra pattern(s) to be displayed.
1: To display zebra 1 only
2: To display zebra 2 only
Both: To display both zebra 1 and zebra 2
Set the display level of zebra 1.