Axis 221 Installation Manual page 8

Page 8
AXIS Camera Management
AXIS Camera Management can automatically find and set IP addresses, show connection
status and manage firmware upgrades of multiple Axis video products. AXIS Camera
Management is available on the CD supplied with this product, or can be downloaded from
www.axis.com/techsup
Set the IP address
1. Check that the AXIS 221/223M is connected to the network and that power has been
applied.
2. Start AXIS Camera Management. When the AXIS 221/223M appears in the window,
double-click it to open the camera's home page. To identify the camera, check for the serial
number in the list. The serial number is located on the product label.
3. See page 12 for instructions on how to set the password.
Set the IP address in multiple devices
AXIS Camera Management speeds up the process of assigning IP addresses in multiple devices
by suggesting available IP addresses from a specified range.
1. Select the devices that you want to configure (you can even select different models) and
click the Assign IP icon.
2. Enter the range of IP addresses, the subnet mask and default router that the devices can
use.
3. Click Find and the program will search in the specified range and suggest an available IP
address for each device.
AXIS 221/223M Installation Guide
multiple cameras / large installations