Front View - Axis 221 Installation Manual

Page 4
AXIS 223M - Rear view
10-pin I/O terminal
connector
DC-Iris
control cable
AXIS 221 - Rear view
10-pin I/O terminal
connector
Power
connector
block
DC-Iris
control cable
Connections
1. Connect the AXIS 221/223M to your network using a standard network cable.
2. Connect power, using one of the 3 supported methods listed below:
• The supplied power adapter.
• Power over Ethernet (PoE) via the network cable. This will automatically be detected if
available via the network.
• The power connector block on the rear panel. See the illustration above.
Audio out
Reset/Control
button
Power adapter
RS-232
connector
connector
Reset/Control
Power indicator
button
Network indicator
RS-232
Power adapter
connector
connector
AXIS 221/223M Installation Guide
Audio in
Network
connector
(also PoE)
Power and network indicators
Power connector
block
Status
indicator
Zoom puller
(Tele/wide)
Focus puller
Network
connector
(also PoE)
AXIS 221/223M

Front view

Serial number
on underside
label
DC-Iris