Clean Cooling System; Spark Plug; Engine Maintenance Schedule; Engine Maintenance Parts - Lincoln Electric POWER-ARC SVM103-C Service Manual

Lincoln electric welder user manual
Table of Contents

Advertisement

D-4
Maintenance
Operation
Check Oil Level
Change Oil
Clean Rotating Screen, Finger
Guard, or Debris Screen
Service Foam Pre-Cleaner
Service Air Cleaner
(if no pre-cleaner)
Service Air Cleaner
(if pre-cleaner present)

Clean Cooling System

Inspect Spark Arrester (Option)
Clean or Replace Spark Plug
Replace In-Line Fuel Filter (Option)
Remove Combustion Deposits
Change oil after first 5 hours, then after every 50 hours or once a year.
Note 1: Change oil every 25 hours when operating under heavy load in high ambient temperatures.
Note 2: Clean more often under dusty conditions or when airborne debris is present.
B&S 8 HP KOOL
BORE PART #

SPARK PLUG

(RESISTOR)
Champion RJ19LM
FUEL FILTER
AIR CLEANER
(PLEATED PAPER)
AIR
PRE-CLEANER
(AS NEEDED)
MAINTENANCE
TABLE D.1

ENGINE MAINTENANCE SCHEDULE

Every 5 Hours
or Daily
Note 2
TABLE D.2 – ENGINE MAINTENANCE PARTS
B&S 9 HP VAN-
GUARD PART #
B&S 491055
B&S 802592
Champion RC12YC
Autolite 3924
B&S 394358
None
B&S 710266
B&S 494511
B&S 710268
B&S 492889
(CAN BE CLEANED AND REUSED AS NEEDED)
POWER-ARC 4000
25 Hours
50 Hours
or Yearly
or Yearly
Note 1
Note 2
Note 2
B&S 8 HP INTEK
PART #
B&S 491055
Champion RC12YC
None
B&S 491588 (5043)
B&S 493537
D-4
100 Hours
or Yearly
100-300 Hours
Note 2
HONDA PART #
NGK BPR6ES
DENSO W20EPR-U
None
5266721
(17210-ZE2-505)
2538429
(17218-ZE2-821)

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Power-arc 4000

Table of Contents