Cleaning, Sanitization And Maintenance Of The Ice And/Or Water Dispenser (If Present) - KitchenAid KRXB9011 Instructions For Use Manual

Table of Contents

Advertisement

Safeguarding the environment
Declaration of conformity
• This appliance has been designed for preserving food and is manufactured in compliance with
Regulation (CE) No. 1935/2004.
• This appliance has been designed, manufactured and marketed in compliance with:
- safety objectives of the "Low Voltage" Directive 2006/95/CE (which replaces 73/23/CEE and
subsequent amendments);
- the protection requirements of Directive "EMC" 2004/108/EC.
Electrical safety of the appliance can only be guaranteed if it is correctly connected to an approved
earthing system.
Cleaning, sanitization and maintenance of the ice and/or
water dispenser (if present)
Failure to follow the instructions regarding sanitizing can compromise the hygienic safety of
the water dispensed.
• When using the appliance for the first time and every time the filter is changed, discard the first 9-14
litres of water, equivalent to 6-7 minutes of dispensing (not necessarily consecutive, but before initial
consumption) and discard the ice produced in the first 24 hours.
• If the water dispenser has not been used for more than 4/5 days, it is advisable to clean the circuit and
run off the first litre of water.
• Reposition the removable water dispenser (if present), ensuring your hands are hygienically clean.
• Clean the ice bucket or drawer regularly but using only drinking water.
• The filter must be changed when indicated on the control panel or when the ice/water dispenser has not
been used for more than 30 days.
• With each filter replacement, sanitise the ice and/or water distribution system using a food grade
disinfectant (with sodium hypochlorite), which does not alter the characteristics of the materials, or use
the "Sanitising Kit" available from the After-Sales Service. Rinse with at least 2 litres of water before
use.
• Only original spare parts supplied by the manufacturer should be used when replacing components in the
ice and water dispenser.
• Any work on the appliance must be carried out by a qualified technician or the After-sales Service.
5

Advertisement

Table of Contents
loading

Table of Contents