Sony DVP-NS900V Operating Instructions Manual page 59

To turn off the Control Menu
Press DISPLAY repeatedly until the Control
Menu is turned off.
*@ You can use the LCD and scroll key on the remote
to select an audio format. Toggle the scroll key up or
down so that "AUDIO" appears in the LCD screen.
Then press down on the scroll key repeatedly to select
one of the audio options.
. While playing a DVD, the sound may change
automatically.
l
You cannot change the sound for SACDs.
When you select "AUDIO," the channels
being played are displayed on the screen.
For example, in Dolby Digital format,
multiple signals ranging from monaural to
5.1 channel signals can be recorded on a
DVD. Depending on the DVD, the number of
the recorded channels may differ.
Current audio format*
Currently plaiing program format**
* "PCM," "DTS," or "DOLBY DIGITAL" is
displayed.
In the case of "DOLBY DIGITAL," the
channels in the playing track are displayed
by numbers as follows:
For Dolby Digital 5.1 ch:
Rear component 2
DOLB
continued-
59
Front component 2+
LFE (Low Frequency
Center component 1
Effect) component 1
**The letters in the program format display
mean the following sound component:
L: Front (left)
R: Front (right)
C: Center
LS: Rear (left)
RS: Rear (right)
s: Rear (monaural): The rear
component of the Dolby Surround
processed signal and the Dolby
Digital signal
LFE: Low Frequency Effect signal