Sony DVP-NS900V Operating Instructions Manual page 27

This connection will use your 2 front speakers connected to your stereo amplifier (receiver) for
sound. If the stereo amplifier (receiver) has audio input jacks L and R only, use @. If the
amplifier (receiver) has a digital input jack, use m. When connecting to an MD deck or a DAT
deck, use @. In this case, you can also connect the player directly to the MD deck or DAT
deck without using your stereo amplifier (receiver). z
n
Recommended surround sound effects for the w connection only
s:
*TVS STANDARD (page 60)
+$ In connection m, you can use the wpphed audio/video cord instead of using a separate audio cord
'e To realize better surround sound effects, make sure that your listening position is in between your speakers
SACD audio signals are not output from the digital jack
continued -
27