Table of Contents
Advertisement
Symptom
Neither video nor audio is output.
There is a point of light on the
display.
The Audio screen is distorted by
electrical noise.
Possible reason
The vehicle ignition switch has not
been turned on.
The connection cord is not
completely connected.
At least 99. 99% of the pixels on
the LCD panel are effective, but it is
possible that 0. 01% of the pixels
may not light or may stay lighted.
Are electrical devices that generate
electrical noise being used in the
vicinity of the unit?
For example, devices generating
high voltage (such as those that
generate negative ions) or high
frequency electromagnetic waves
(cell phones or two-way radios)
Corrective action
Turn the vehicle ignition switch to
ACC or ON.
Check the connections to each
connection cord.
This is not a defect, so please use
the deck in this condition.
Use such equipment as far away
from the unit as possible.
If such equipment continues to
affect the unit, even from a
distance, refrain from using such
equipment while the unit is in
operation.
157
Advertisement
Table of Contents
