Table of Contents
Advertisement
Network Settings in the FRITZ!Box
Unique Local Adresses
The communication within the local network takes place via
the Unique Local Addresses (ULA). If no IPv6 Internet connec-
tion is established, the network devices do not have a ULA
and communication between them is restricted. For this case
you can set the FRITZ!Box such that the network devices re-
ceive the ULA from the FRITZ!Box.
DHCPv6 Servers in the Home Network
The FRITZ!Box is equipped with its own DHCPv6 server. The
DHCPv6 server of the FRITZ!Box is switched on by default.
The DHCPv6 server assigns the network devices their IPv6
settings. These settings are used instead of the data in the
router advertisement messages. The DNS server, IPv6 prefix-
es or IPv6 addresses can all be assigned by DHCPv6. Define
which IPv6 settings should be assigned by the DHCPv6 serv-
er.
UPnP Settings
The Universal Plug-and-Play (UPnP) service included in your
FRITZ!Box provides status information about the FRITZ!Box to
all connected computers. Programs with UPnP support on
these computers can receive this information and use them
to display the status of the FRITZ!Box (e.g., connection status,
data transmission). UPnP service thus allows you to monitor
your FRITZ!Box from a connected computer.
Here is how to change the UPnP settings:
1.
2.
3.
Guest Access over the LAN 4
The network port "LAN 4" can be configured as a guest ac-
cess. Guests can then connect their laptops to the guest ac-
cess with a network cable to access the Internet. The guest
device does not have access to the home network.
FRITZ!Box 3370
Open the FRITZ!Box user interface (see
Enable the advanced view.
Configure the UPnP settings in the "Home Network / Net-
work" menu on the "Programs" page.
77
page
26).
Advertisement
Table of Contents
