Table of Contents
Advertisement
Security and Handling
•
•
•
•
•
•
•
Handling the FRITZ!Box
•
•
•
•
•
FRITZ!Box 3370
Make sure that the ventilation slits on the FRITZ!Box
housing are always unobstructed. The ventilation slits
provide for air cooling.
–
The FRITZ!Box should not be placed on a carpet or on
upholstered furniture.
–
Do not cover the FRITZ!Box.
Do not place the FRITZ!Box on excessively heat-sensitive
surfaces, as the base of the device can heat up during
normal operation.
Do not install the FRITZ!Box during an electrical storm.
During a storm, disconnect the FRITZ!Box from the power
supply and from the DSL or VDSL line.
Never let liquids get inside the FRITZ!Box. Otherwise,
electric shocks or short circuits may result.
Do not open the FRITZ!Box housing. The device contains
hazardous components and should only be opened by
authorized repair technicians.
The FRITZ!Box is intended for indoor use only.
You can either place FRITZ!Box on a horizontal surface or
mount it on a wall. For a drilling template to mount the
FRITZ!Box on a wall, see
Place or hang the FRITZ!Box in a dry location that is free
of dust and protected from direct sunlight.
For ideal operating conditions, mount the FRITZ!Box on a
wall with the cables connected on the bottom.
When connecting the FRITZ!Box to your computer using a
network cable, keep in mind that the cable can be no
longer than 100 m.
If you would like to establish wireless connections be-
tween the FRITZ!Box and the computer, position the
FRITZ!Box at a central location.
13
page
120.
Advertisement
Table of Contents
