Tuning Channels; Tuning Channels Using The Channel Browscr Lm - Toshiba 40G300U Owner's Manual

Chapter 6: Using the TV~ features
3
Press .... or ~ to highlight the video source you
want to label.
1
MENU
Press 0 and open the
Prelerences
menu.
2
Highlight
Input Labeling
and press @.
3
Highlight
Reset
and press @.
The Channel Browser HI provides an easy navigation
interface for all your channels and inputs. This
feature allows you to:
• Navigate the contents of all of your inputs.
• Keep a Iist of your favorite channels (see
"Favorites Browser:' below).
• Keep a history of the last 32 channels or inputs
viewed.
• Quickly surf and tune your recently viewed
channels/inputs from the Channel Browser™
History List (illustrated on the next page).
• Surf via Browse mode (to immediately tune
channels as you highlight them in the Channel
Browser HI ) or Select mode (to surf over channels
in the Channel Browser™ before you select one
to tune).
• Quickly change inputs from the Inputs List.
• Quickly select REGZA-LlNK devices from the
REGZA-LI K List.
Tuning channels
Tuning channels using the
Channel Browser™
Favorites Browser
1
FAV BROWSER .
Press 0 to open the Favontes browser
list.
2
Highlight the channel or input to delete by
• " " . . . NUT ....
presslllg
IQ;l ....
or
d3J .
3
Press and hold
(100)
for 3 seconds. The channell
input will be removed from the Favorites list.
To set up the Channel Browser™:
1
From the
Preferences
menu, highlight
Channel
Browser Setup
and press @.
2
Press .... to highlight
Navigation,
and then pre s
.... or
~
to select either
Browse Mode
or
Select
Mode.
The Favorites Browser allows you to quickly set up a
favorite channels/inputs list that is integrated into the
Channel Browser r".
To add a favorite channeUinput:
1
Tune to the channel or input.
2
FAV BROWSER .
Press and hold 0 for 3 seconds.
Note: Additions are added to the beginning of
the Favorites list on the left side of the Channel
Browser™
To delete a favorite channeUinput:
l I o ~
I ~CA
2
c.eo.
3
V"*
AO'C""d.'
•
5 ...,...... OSS
",,"
7 "(JUl •
.
'"
o •
Ift1
'0"_ :
~
Input Selection screen
with all inputs labeled
except input 4, which
has been hidden.
Input Selection screen
with no inputs labeled.
Input labeling example:
The screen below left shows the default
Input Selection
screen (with none of the inputs labeled as a specific
device). The screen below right is an example of how
you could label the inputs if you connected a VCR to
VIDEO I. Cable TV to VIDEO 2. a video recorder to
ColorStream HD. a DTV set-top box to HDMI I. and
a satellitelDSS set-top box to HDMI 2. and a DVD
player to HDMI 3.
To clear the input labels:
4
Press .... or ~ to select the desired label for that
input source. If a particular input is not used. you
can select
Hide
as the label. which will cause that
input to be "grayed out" in the Input Selection
screen and skipped over when you press
4NPUT)
on
the remote control.
5
To save the new input labels, highlight
Done
and
press@.
To revert to the factory default labels, highlight
Reset
and press @.
(continued)
I
36