Connecting A Home Network - Toshiba 40G300U Owner's Manual

Note:
• The PC audio input terminals on the TV are shared
with the HoMI-
1 analog audio input terminals (L&
page 50)
• Some PC models cannot be connected to this TV
• An adapter is not needed for computers with
a
compatible mini o-sub 15-pin terminal.
• Depending on the OVO'S title and the
specifications of the PC on which you are playing
the oVo-Video, some scenes may be skipped or
you may not be able to pause during multi-angle
scenes.
• Signal names for mini D-sub IS-pin connector
Pin
Signal
Pin Signal Pin
Signal
No. name No. name No; name
I R 6 Ground
II
Reserved
2
G 7
Ground
12
SDA
3 B 8 Ground 13 H-sync
4 Reserved 9 5V 14 V-sync
5
Reserved 10 Ground
15 SCL
To connect a PC to the HDMI terminal on the TV:
When connecting a PC to the HDMI terminal on the
TV. use an HDMI-to DVr adapter cable and analog
audio cables.
If connecting a PC with an HOMI terminal, use an
HOMI cable (type A connector). Separate analog
cables are not necessary
(~page
16).
TV back panel
nDMllNIIIIIll
Hum'
I 02]illJlll--,
PC audio
cable
Note:
• The edges of the images may be hidden.
• If receiving
a
480i (HOM/), 480p (HoMI), 720p,
1080i, or 1080p signal program, Native mode
scales the video to display the entire picture within
the borders of the screen (ie. no overscanning).
Connecting a home network
The LAN port allows your Toshiba TV to connect to
your home network. You can LIse this revolutionary
home entertainment networking system to access
photo. video and audio files that are stored on a
DLNA server and play/display them on your TV. For
supported formats. see page 53.
Note.
• The TV's home network connection allows
access to file sharing only. You will NOT be
able to use the TV to access the Internet.
• If you use
a
hub or switch to connect the
TV to your home network, you may not be
able to use the automatic setup and have to
manually set up the network address. See
page 55.
• If you use a router with built-in OHCP
functionality, use the automatic setup.
Manual setup may not work.
• If you connect the TV and
PC
directly, use
Ethernet crossover cable.
Computer
PC audio
output
The HDMI input can accept and display VGA, SVGA.
XGA, WXGA. SXGA, 480i (60Hz). 480p (60Hz). nop
(60Hz), 1080i (60Hz), and I080p (24Hz/60Hz) signal
formats. For detailed signal specifications, see page 66.
19
I