Package Contents ....................5 USB Token Contents ..................5 Physical Details ....................5 What You Might Need ..................7 Quick Installation ....................7 WiPG-1000 Receiver Device ................9 DoWiFi for Windows ..................10 Install the application ..................10 Start the application ..................11 Quick Connect....................11 Connect to WiFi Network ................12...
Page 3
Table of Contents Install the application ..................25 Start the application ..................25 Quick Connect....................25 Connect to WiFi Network ................26 Connect to Receiver Device .................26 Login ........................27 Main User Interface ..................27 Screen Projection .....................27 Audio Projection ....................28 9.10 Menu ........................28 9.10.1 Show Receiver Information ................29 9.10.2 Web Admin......................29 9.10.3...
WiPG-1000 User Manual 1. Overview wePresent WiPG-1000 is professional wireless presentation gateway. By enabling the Revolutionary “interactive” and “wireless” functions, you can throw your presentations wirelessly from a PC, Mac, iPad, iPhone, or Android devices to a projector! And use your pad, tab or phone to control your PC/Mac, or view the presenting slides! • WiPG-1000 Features Highlight:...
• 2 WiFi Antenna • Quick Installation Guide • Warranty Card 3. USB Token Contents • Windows Installer (WiPG-1000 Windows Installer) • MAC Installer (WiPG-1000 Mac Installer) • VAC Driver (For Windows XP Audio Projection) • VDD Driver (For Windows Virtual Extended Screen) •...
Page 6
WiPG-1000 User Manual • Rear Panel Audio Jack Antenna USB Port RJ-45 VGA Connector HDMI Power Jack Antenna Description Antenna WiFi Antenna USB Port (Rear) USB port for USB IWB device (HID type) RJ-45 10/100M RJ-45 port VGA Connector VGA connector...
• Speaker (Optional, for audio projection feature) • USB Mouse and Keyboard (Optional, for remote desktop feature) • USB HID IWB Device (Optional, for IWB over IP feature) 6. Quick Installation 1. Connect wePresent WiPG-1000 device to Projector through VGA port and turn on projector power. →Back...
Page 8
3. Attach the speaker cable to WiPG-1000 phone jack for audio output 4. Attach the USB mouse and keyboard to WiPG-1000 front USB port for OSD control and remote desktop control 5. Attach the USB IWB cable to WiPG-1000 rear USB port for IWB control...
2. It will show the Quick Guide Information, WiFi Network Name, IP Address and Code on standby screen. 3. If there is sender connected to WiPG-1000 device, it will show the PC-List on standby screen, conference moderator can use the USB mouse/keyboard to select the PC and control it remotely.
6. System will enter the Screen Saver mode if none is connected, it will restore to standby status immediately when there is any sender connected. 8. DoWiFi for Windows 8.1 Install the application 1. Make sure your PC WiFi is enabled already, and connect your PC to wePresent WiPG-1000 box through WiFi. →Back...
1. WiPG-1000 will memorize the last successful connection profile and open the quick connect dialog, you can enter the code and press the “Connect” button to connect this WiPG-1000 directly. 2. If you want to connect to another WiPG-1000 receiver, please press the “Rescan” button. →Back...
WiPG-1000 User Manual 8.4 Connect to WiFi Network 1. WiPG-1000 will search the available WiFi Network and list the WiPG-1000 WiFi Device. You can select a network and press the “Connect” button to connect the selected WiFi Device. 2. You can press the “Refresh” button to search again or press the “All” button to list all available WiFi Network name.
WiPG-1000 User Manual 2. If you want to connect to another receiver or cancel the login, please press the “Cancel” button. 8.7 Main User Interface Menu Area Control Area for Screen Projection Feature Status Indicator 8.8 Screen Projection 1. Click the “Play” button for full or split screen, you can project the main screen on to the display immediately, click the “Pause”...
8.9 Audio Projection 1. When you are doing the full screen projection, you can also choose to project the audio to WiPG-1000 receiver for the multimedia or video scenario. 2. To enable or disable the audio projection feature, please change the setting from WiPG-1000 menu.
WiPG-1000 User Manual 8.10.1 Show Receiver Information 1. Click “Show Receiver Information”, it will display the Receiver Information on the projecting screen, including WiFi Name, IP Address and Code, then close automatically after 30 seconds. 8.10.2 Web Admin 1. Click “Web Admin”, it will open the browser and connect to the receiver web admin page automatically.
8.10.3 Search Receiver Device 1. Click “Search Receiver Device”, it will disconnect from current receiver and search the receiver again. 8.10.4 Launch SidePad -> SidePad Receiver 1. Open the main menu of the WiPG-1000 application(Win/Mac), and choose the item, “Launch SidePad -> SidePad Receiver” Note: You have to download the “SidePad receiver” on your Android/iOS device, then connect the Android/iOS to WiPG-1000 device through WiFi and Launch “‘SidePad Receiver”.
WiPG-1000 User Manual 8.10.5 Enable BrowserSlides 1. Click the “Enable BrowserSlides”, it will start to broadcast your slides to the browser on connected mobile devices. Note: Audience need to connect to WiPG-1000 WiFi Network, open the browser and click the “BrowserSlides” button to start receiving the slides. 8.10.6 Select Projection Desktop (Win XP/Vista/7/8) 1. Click the “Select Projection Source” then you can select to project the main screen of desktop or the virtual extended screen.
WiPG-1000 User Manual 8.10.7 Projection Quality 1. Click the “Projection Quality”, choose “Normal” for faster projection speed with lower screen image quality, and “Best” for clear screen image quality but slower projection speed. 8.10.8 Projection Mode 1. The Projection Mode provides the option to support “Presentation Mode”...
WiPG-1000 User Manual 8.10.9 Projection Aspect Ratio 1. It can provide the projection screen ratio setting of “Keep Aspect Ratio” and “Fit Full Screen”. 8.10.10 Enable USB IWB Bridge 1. Click the “Enable USB IWB Bridge”, it will enable the USB IWB Bridge feature. 2. When you start the full screen projection, it will bridge the IWB device to your PC wirelessly.
WiPG-1000 User Manual 8.10.11 Advanced Screen Capture 1. Click the “Advanced Screen Capture”, you will be able to see tip windows and other layered windows (include the main UI) on the connected display. However, the mouse cursor may blink from time to time when you are projecting your PC screen! •...
WiPG-1000 User Manual 8.10.12 Send Audio to Display 1. Click “Send Audio to Display” to start the audio projection feature. It will mute your local speaker during the projection and restore it when it closes the application. Note: For Windows XP system, you have to install the Audio driver. (VAC.exe) You can find the driver from USB token. 8.10.13 Auto Power Manager 1. To make the highest projection performance, application will turn the PC’s windows power scheme from current settings to “highest performance”,...
1. Click “Auto WiFi Connect” to enable the WiFi connect feature through WiPG- 1000 application. 8.10.15 Make wePresent WiPG-1000 Token 1. Click “Make wePresent WiPG-1000 Token” to make a USB wePresent WiPG- 1000 Token, you can insert a USB thumb drive and follows the wizard to make the Token.
WiPG-1000 User Manual 8.10.16 Copy Application to desktop 1. Click the “Copy Application to desktop”, it will copy the application to your desktop immediately even you don’t have the system privilege →Back...
WiPG-1000 User Manual 8.10.17 About 1. Click “About” to show system information. It includes product model name, Client version, IP address and other information. 8.10.18 Exit 1. Click “Exit” to exit this application. It will stop current playing status and close the application immediate.
1. WiPG-1000 will memorize the last successful connection profile and open the quick connect dialog, you can enter the code and press the “Connect” button to connect this WiPG-1000 directly. 2. If you want to connect to another WiPG-1000 receiver, please press the “Rescan” button. →Back...
WiPG-1000 User Manual 9.4 Connect to WiFi Network 1. WiPG-1000 will search the available WiFi Network and list the WiPG-1000 WiFi Device. You can select a network and press the “Connect” button to connect the selected WiFi Device. 2. You can press the “Refresh” button to search again.
WiPG-1000 User Manual 9.6 Login 1. When it connects to a “Code” protection enabled WiPG-1000 receiver, you have to enter the “Code” and press the “Connect” button to login the receiver. (You can find the CODE from the right-upper of OSD standby screen) 2.
9.9 Audio Projection 1. When you are doing the full screen projection, you can also choose to project the audio to WiPG-1000 receiver for the multimedia or video scenario. 2. To enable or disable the audio projection feature, please change the setting from WiPG-1000 menu.
9.10.3 Search Receiver Device 1. Click “Search Receiver Device”, it will disconnect from current receiver and search the receiver again. 9.10.4 Launch SidePad -> SidePad Receiver 1. Open the main menu of the WiPG-1000 application(Win/Mac), and choose the item, “Launch SidePad -> SidePad Receiver” Note: You have to download the “SidePad receiver” on your Android/iOS device, then connect the Android/iOS to WiPG-1000 device through WiFi and Launch “‘SidePad Receiver”.
9.10.5 Enable BrowserSlides 1. Click the “Enable BrowserSlides”, it will start to broadcast your slides to the browser on connected mobile devices. Note: Audience need to connect to WiPG-1000 WiFi Network, open the browser and click the “BrowserSlides” button to start receiving the slides. 9.10.6 Projection Quality 1. Click the “Projection Quality”, choose “Normal” for faster projection speed with lower screen image quality, and “Best”...
WiPG-1000 User Manual 9.10.7 Projection Mode 1. The Projection Mode provides the option to support “Video Mode” latency control and “Presentation Mode”. 2. For the “Video Mode”, it will trigger the longer latency but much smooth performance when you are watching video, meanwhile it will change PC resolution to 1024x768 and gray some option.
WiPG-1000 User Manual 9.10.9 Send Audio to Display 1. Click “Send Audio to Display” to start the audio projection feature. It will mute your local speaker during the projection and restore it when it closes the application. Note: You have to install the SoundFlower Audio driver. You can find the driver from USB token. 9.10.10 Auto WiFi Connect 1. Click “Auto WiFi Connect” to enable the WiFi connect feature through WiPG- 1000 application.
WiPG-1000 User Manual 10. Web Management 10.1 Home Page 1. Make sure your PC connect to wePresent WiPG-1000 box successfully. 2. Enter the receiver IP address or Device Name (SSID) on browser; you can find the IP address and SSID on the projector screen.
, Play Split #1 , Play Split #2 ,Play Split #3 , Play Split #4 and Stop 6. Uncheck the “Allow Control from this page only”, it will disable the centralized control and user can project the screen to WiPG-1000 freely. →Back...
WiPG-1000 User Manual 10.4 BrowserSlides 1. Press the “BrowserSlides” button to enter the BrowserSlides page. 2. Enter the password if necessary. (Please refer to 10.5.8 BrowserSlides setting to configure the password.) 3. Start to receive the projecting slides. 10.5 Admin 1. Click [Admin] and then enter the password to login web admin page.
• Wireless MAC address: wireless MAC address • Wire MAC address: wire MAC address Connection Status: • Projecting status: “Waiting for projecting” or “Projecting” • Total Users: It shows how many users login to wePresent WiPG-1000. 10.5.2 Device Setup 1. Click [Device Setup] button, it will show the device setting items, • Choose <VGA> or <HDMI> output option • <Resolution>: HDMI: 720p, 1080i, 1080p •...
<Note: Auto-Configuration Network Setup on WiPG-1000> The default setting of the wePresent WiPG-1000 box is DHCP client. When the wePresent WiPG-1000 box is connected to a LAN that already has a DHCP server present, the wePresent WiPG-1000 box takes an IP address assigned to it by the server. When the wePresent WiPG-1000 box is connected to a LAN that does not have a DHCP server, the wePresent WiPG-1000 box becomes the DHCP server in the network.
Page 39
• SSID Broadcast: The default value is “Enable” • Channel: to set fixed channel or Auto. The “Auto” means after power on wePresent WiPG-1000, it will scan all of wireless channel and select clear one channel automatically. • Encryption: you can select “Disable” or one of WEP/WPA/WPA2 64bit or 128bit in ASCII or HEX string.
WiPG-1000 User Manual 10.5.4 OSD Setup 1. Click [OSD Setup] button, you can change the standby Logo image Change Logo Image ▪ <Reset to default>: Restore to default Logo image. ▪ <Image File Upload>: Upload the customized Logo Image. 2. Display Option →Back...
WiPG-1000 User Manual Device Information Show All: Display SSID, IP address and Code information. Hide All: Hide SSID, IP address and Code information. Font Size Normal: Normal SSID, IP address and Code font size. Large: Make SSID, IP address and Code font size bigger.
1. Click [Reset to Default] button to restore factory default settings. <Apply> : Confirm and take action. *** To execute the Hardware Factory Reset to Default, Please follow below procedures. 1.Press [Reset] button and Hold. 2.Turn on wePresent WiPG-1000 box. 3.Wait for over 10 seconds and relief [Reset] button. 4.It will take effect to restore factory default settings. →Back...
E. After a few minutes, a complete message shown on the screen. F. Restart wePresent WiPG-1000 box to take effect. Warning: Don’t power off wePresent WiPG-1000 while firmware upgrade in progress, otherwise will cause your Box doesn’t work and have to return device to your vendor for fixing.
Code” or “Use the following Code” Note: The WiPG-1000 logged-in user is not identical to BrowserSlides user, and they both consume the wireless bandwidth for device connection. If there are more than 10 users logged into WiPG-1000, it is recommended to connect WiPG-1000 to company network through Ethernet or bridge WiPG-1000 to a router due to wireless bandwidth concern.
WiPG-1000 User Manual 10.5.9 Reboot System 1. Click [Reboot System] button, you can restart the system • <Reboot>: reboot system automatically. 10.5.10 Logout 1. Click [Reboot System] button, you can logout the WiPG-1000 →Back...
Need help?
Do you have a question about the WiPG-1000 and is the answer not in the manual?
Questions and answers