To Disconnect One Party; To Independently Hold Two Calls; Dialing Modes; Do Not Disturb - Nortel Norstar ICS Features Manual

Conference

To disconnect one party:

continued
Press the line or intercom button of the caller you want to disconnect,
then press
caller to resume your conversation.

To independently hold two calls:

Press the line or intercom button of the first caller, then press ≥.
The second caller is automatically put on hold. To re-establish the
conference, retrieve one call from hold, press ≤‹, then retrieve
the second call from hold.
≤•°¤
Dialing
modes
Choose one of three methods of dialing.
^ (set-based)
1. Press ≤•°¤.
2. Press £ to select the mode.
3. Press ≥ to store the mode.
Standard Dial: Select a line, then dial the number. (Standard Dial is
always available, even when another dialing mode is selected.)
Automatic Dial: Dial the number without choosing a line button first.
Your prime line is automatically selected for the call.
Pre-Dial: Dial the number, then press a line button to place the call.
Edit the number by pressing √ before placing the call.
≤°fi
Do Not
Disturb
When you are not on a call prevent all incoming calls, except priority
calls, from ringing at your telephone. When you are on a call, block an
incoming priority call.
≤°‚¤
Group
Listening
Use both the handset and speaker while you are on a call. To avoid
*^ (not avail.)
electronic feedback, keep the handset away from the speaker during
the call, and press ®to hang up.
≥
Hold
Temporarily suspend a call.
To retrieve a held call, press the line button for the held call.
*^ (Press Hold/Recall)
Exclusive Hold ≤‡· or ≤ ≥
Temporarily suspend a call and prevent other telephones from picking
it up.
≤fi
Last
Number
Automatically redial the last external telephone number that you
Redial
dialed.
® . Press the line or intercom button of the remaining
Cancel ≤£°fi
Cancel ≤£°‚¤
3