10.1 Version Info
10.1.1 AP/MP/HW Version
10.1.2 Factory Version
10.2 Device Test
10.2.1 Auto All Test
LCD On/Off -> Keypad LED On/Off -> Color Auto Test -> Ringtone Test -> Vibrator Test ->
Keypad Test
10.2.2 LCD
1) Auto Color Test
Red -> Green -> Blue -> Balck -> White To exit test, press the right arrow key.
2) Color Table Test : display the RGB table
10.2.3 LED
1) Backlight Test
This controls brightness of Backlight. When entering into the menu, the present
backlight-value in the phone is displayed. Use Left/Right key to adjust the level of
brightness.
2) Keypad Light Test
This controls brightness of keypad light. When entering into the menu, the present
keypad light-value in the phone is displayed. Use Left/Right key to adjust the level of
brightness of keypad.
3) Blinking Test
Keypad & LCD Backlight blinking test.
10.2.4 Vibrator
This menu is to test the vibration mode.
10.2.5 Sound
1) Ringtone Test
This menu is test ring tone.
2) Audio Calibration
This menu is to test db value of each volume level
3) Vocoder Calibration
This menu is to test db value of each frequency of codec.
Copyright © 2007 LG Electronics. Inc. All right reserved.
Only for training and service purposes
10. Engineering Mode
- 213 -
LGE Internal Use Only