Mx-Ebx3; Unpacking; Installation - Sharp MX-M623N Installation Manual

[13] MX-EBX3

MX-M753N

1. Unpacking

The MX-EBX3 is available in the following some types. Instillation
must be performed according to the type.
A. Early version type/Type A/Type B
(1) Parts included
No. Packed part names
1 Scanner function expansion PWB
2 Mounting plate
3 Screw (M3 x 6 S tight)
* Not bundled in the old type model. Must not be used for installa-
tion of this machine.
• Firmware
The firmware must be revised to the latest version.
The ACRE firmware version must be 03.00.J2 or later.
A3MXEBX3*
FS9205S
9B2
R. C.
Identification marking
Nothing: Early version type
A
: Type A
B
: Type B
1 2 3
Quantity Remarks
1
1 *
2 *
MX-M753N MX-EBX3 13 – 1
B. Type C
Service Manual
(1) Parts included
No. Packed part names
1 Scanner function expansion PWB
2 Mounting plate
3 Screw (M3 x 6 S tight)
* Must not be used for installation of this machine.
• Firmware
Use SIM22-5 to check to confirm that the ACRE firmware version
is 03.00.J2 or later.
If the version is before 03.00.J2, upgrade the version to the latest
one.

2. Installation

A. Turn off the power of the main unit
1) Turn the power switch located on the operation panel to the
"OFF" position.
2) Open the front cabinet. Turn OFF the power switch in the front
cabinet of the main unit.
A3MXEBX3*
C
FS9205S
9B2
R. C.
Identification marking
C
: Type C
1 2 3
Quantity Remarks
1
1 *
2 *
OFF