Installation Guide; Wall Mount - ATN TASC 336-7 Operator's Manual

2.2. INSTALLATION GUIDE

2.2.1. WALL MOUNT

NOTE
If the machine is installed outside, make sure the air tightness
of thermal speed dome is good and keep away from the place
with high temperature or humidity.
There are so many kinds of brackets, so we just introduce the
process of installation of thermal speed dome. The installation of
bracket please refer to bracket installation guide.
Steps a. Take the bracket base as a template to mark the Posi-
tions Of the holes which should be drilled in the wall.
Steps b. Put video cable, power supply cable and control signal
through the cavity of bracket. Leave cables enough long outside
the bracket.
2-4