Mitsubishi City Multi Series PLFY-P08NCMU-E Technical & Service Manual page 13

PLFY-P08NCMU-ER2.TH
PLFY-P08NCMU-ER3.TH
Notes:
1. At servicing for outdoor unit, always follow the wiring diagram of outdoor unit.
2. In case of using MA-Remote controller, please connect to TB15. (Remote controller wire is non-polar.)
3. In case of using M-NET, please connect to TB5. (Transmisson wire is non-polar.)
4. Symbol [S] of TB5 is the shield wire connection.
5. Symbols used in wiring diagram above are,
6. The setting of the SW2 dip switch differs in the capacity. For the detail, refer to Fig.1.
7. Use copper supply wire.
LED on indoor controller board for service
Mark Meaning
LED1
Main power supply
(RED)
LED2
Power supply for
MA-Remote controller
(RED)
OCH410D
PLFY-P12NCMU-ER2.TH
PLFY-P12NCMU-ER3.TH
: terminal block, :connecter.
Function
Main power supply(Indoor unit:208-230V) power on → Lamp is lit.
Power supply for MA-Remote controller on → Lamp is lit.
PLFY-P15NCMU-ER2.TH
PLFY-P15NCMU-ER3.TH
<Fig.1>
MODELS
P08
P12
P15
The black square (■) indicates a switch position.
13
(RED)
(RED)
SW2
ON
OFF
1 2 3 4 5 6
ON
OFF
1 2 3 4 5 6
ON
OFF
1 2 3 4 5 6