Summary of Contents for Bosch GCM 8 SJL Professional
Page 1
OBJ_BUCH-1736-002.book Page 1 Wednesday, October 31, 2012 3:55 PM Robert Bosch GmbH Power Tools Division 70745 Leinfelden-Echterdingen GCM 8 SJL Professional Germany www.bosch-pt.com 1 609 92A 04K (2012.11) PS / 333 UNI de Originalbetriebsanleitung el Πρωτότυπο οδηγιών χρήσης sr Originalno uputstvo za rad en Original instructions Orijinal işletme talimatı...
This will en- protection. Protective equipment such as dust mask, sure that the safety of the power tool is maintained. non-skid safety shoes, hard hat, or hearing protection Bosch Power Tools 1 609 92A 04K | (31.10.12)
Page 11
Bosch power tools. Replace damaged exten- time. sion cables. This will ensure that the safety of the power ...
47 Interior clamping flange 48 Threaded rod 49 Screws for insert plate 50 Lock screw of the material stop* Robert Bosch GmbH, Power Tools Division 51 Clamping screw of the material stop* D-70745 Leinfelden-Echterdingen Leinfelden, 05.11.2012 52 Adjustment screw for laser position (parallelism) 53 Stop screw for 0°...
The values given are valid for a nominal voltage [U] of 230 V. For different voltages and models for specific countries, these values can vary. Mounting to a Bosch Saw Stand Dimension of suitable saw blades With the height-adjustable legs, Bosch GTA saw stands pro- Saw blade diameter 210 –216 vide firm support for the power tool on any surface.
– Insert the material clamp 29 provided into one of the holes screw turning in anticlockwise direction. 35 intended for it. – Adapt the threaded rod 48 of the screw clamp to the work- piece height. 1 609 92A 04K | (31.10.12) Bosch Power Tools...
Note: Before sawing, check if the cutting line is still indicated 33.9° Turn the stop completely to correctly (see “Adjusting the Laser”, page 31). The laser the rear beam, as an example, can misadjust due to vibrations after in- tensive use. Bosch Power Tools 1 609 92A 04K | (31.10.12)
Page 17
– Press locking switch 9 and slowly guide the tool arm down- are required for this. ward by the handle 8. A Bosch after-sales service station will handle this mainte- – Saw through the workpiece applying uniform feed. nance task quickly and reliably.
Page 18
0° mark. strap 58. – Carry the machine by the transport handle 3 or hold it by the recessed handles 26 on the sides of the saw table. Bosch Power Tools 1 609 92A 04K | (31.10.12)
Tel. Service: (0844) 7360109 If the replacement of the supply cord is necessary, this has to Fax: (0844) 7360146 be done by Bosch or an authorized Bosch service agent in or- E-Mail: boschservicecentre@bosch.com der to avoid a safety hazard. Ireland Cleaning Origo Ltd.
Page 20
Equipment and its implementation into national right, power tools that are no longer usable must be collected separately and disposed of in an environmentally cor- rect manner. Subject to change without notice. Bosch Power Tools 1 609 92A 04K | (31.10.12)