Summary of Contents for Bosch GCM 80 SJ Professional
Robert Bosch GmbH Power Tools Division 70764 Leinfelden-Echterdingen GCM Professional GERMANY www.bosch-pt.com 80 SJ | 800 SJ | 8000 SJ 1 609 92A 0HN (2014.06) PS / 299 EURO de Originalbetriebsanleitung Orijinal işletme talimatı mk Оригинално упатство за работа en Original instructions...
This will en- protection. Protective equipment such as dust mask, sure that the safety of the power tool is maintained. non-skid safety shoes, hard hat, or hearing protection Bosch Power Tools 1 609 92A 0HN | (16.6.14)
Check the cable regularly and have a damaged cable re- paired only through an authorised customer service agent for Bosch power tools. Replace damaged exten- 1 609 92A 0HN | (16.6.14) Bosch Power Tools...
46 Screw for mitre angle indicator Accessories shown or described are not part of the standard deliv- ery scope of the product. A complete overview of accessories can be found in our accessories program. Bosch Power Tools 1 609 92A 0HN | (16.6.14)
Mounting to a Bosch Saw Stand Sound pressure level 93 dB(A); Sound power level With the height-adjustable legs, Bosch GTA saw stands pro- 106 dB(A). Uncertainty K =3 dB. vide firm support for the power tool on any surface. The work-...
– Pull the transport safety-lock 28 completely outward. – Guide the tool arm slowly upward. Use only saw blades whose maximum permitted speed is higher than the no-load speed of the power tool. Bosch Power Tools 1 609 92A 0HN | (16.6.14)
26 are provided on the saw table: ways have a straight edge to face against the fence. Long workpieces must be underlaid or supported at their free Left Right end. 0° 45° 22.5° 15° 15° 22.5° 45° 1 609 92A 0HN | (16.6.14) Bosch Power Tools...
44 so that the saw blade does not come into are required for this. contact with the insert plate over the complete length of A Bosch after-sales service station will handle this mainte- the possible slide motion. nance task quickly and reliably.
If the replacement of the supply cord is necessary, this has to Checking: (see figure O1) be done by Bosch or an authorized Bosch service agent in or- – Adjust an angle gauge to 45° and position it on the saw ta- der to avoid a safety hazard.
Fax: (01) 4666888 tronic Equipment and its implementation Australia, New Zealand and Pacific Islands into national right, power tools that are no Robert Bosch Australia Pty. Ltd. longer usable must be collected separately Power Tools and disposed of in an environmentally cor- Locked Bag 66 rect manner.