Download
Share
Print this page
Blanco BSID4610X Instruction Manual
  1. Manuals
  2. Brands
  3. Blanco Manuals
  4. Dishwasher
  5. BSID4610X
  6. Instruction manual

Blanco BSID4610X Instruction Manual

Hide thumbs

Advertisement

Quick Links

Instruction Manual
for Dishwasher
BSID4610X

Advertisement

loading
Need help?

Need help?

Do you have a question about the BSID4610X and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Blanco BSID4610X

Summary of Contents for Blanco BSID4610X

  • Page 1 Instruction Manual for Dishwasher BSID4610X...
  • Page 2 You will find that the clean lines and modern look of your Blanco dishwasher blends in perfectly with your kitchen décor. It is easy to use and performs to a high standard.

  • Page 4: Table Of Contents

    Contents Safety and operating instructions ___________________________ 4 Installation and hook-up __________________________________ 7 Description of the controls _______________________________ 11 Operating instructions ___________________________________ 19 Cleaning and maintenance _______________________________ 32 Troubleshooting _______________________________________ 35 Thank you for choosing one of our products. You are advised to read this manual carefully; it contains all the information you need about the right conditions for the proper, safe use of your dishwasher.

  • Page 5: Safety And Operating Instructions

    1. Safety and operating instructions THIS MANUAL FORMS AN INTEGRAL PART OF THE APPLIANCE: IT MUST ALWAYS BE KEPT INTACT TOGETHER WITH THE DISHWASHER. BEFORE USING THE APPLIANCE, CAREFULLY READ ALL THE INSTRUCTIONS CONTAINED IN THIS MANUAL. INSTALLATION MUST BE PERFORMED BY A QUALIFIED TECHNICIAN, IN COMPLIANCE WITH THE REGULATIONS IN FORCE.
  • Page 6 DO NOT USE STEAM CLEANERS TO CLEAN THE DISHWASHER. WARNING: SOME DISHWASHER DETERGENTS ARE STRONGLY ALKALINE. THEY CAN BE EXTREMELY DANGEROUS IF SWALLOWED. AVOID CONTACT WITH THE SKIN AND EYES AND KEEP CHILDREN AWAY FROM THE DISHWASHER WHEN THE DOOR IS OPEN. CHECK THAT THE DETERGENT RECEPTACLE IS EMPTY AFTER COMPLETION OF THE WASH CYCLE.
  • Page 7 DO NOT INTRODUCE SOLVENTS SUCH AS ALCOHOL OR TURPENTINE WHICH MAY CAUSE AN EXPLOSION. DO NOT LOAD DISHES THAT ARE SOILED WITH ASH, WAX OR PAINTS. DO NOT DRINK THE WATER RESIDUES WHICH MAY BE PRESENT INSIDE THE DISHES OR DISHWASHER AT THE END OF THE WASHING PROGRAM AND BEFORE THE DRYING CYCLE.

  • Page 8: Installation And Hook-Up

    Installation instructions 2. Installation and hook-up Remove the polystyrene basket retainers. Position the appliance in the desired place of installation. The back or sides of the dishwasher may be placed up against walls or other furniture units. If the dishwasher is installed near a heat source, fit the special insulating panel to prevent overheating and malfunction of the appliance.
  • Page 9 Water supply connection Preventing the risk of clogging or damage: if the water pipe is new or has not been used for a long time, before connecting to the water supply check that the water is clear and free of impurities, to prevent damage to the appliance.
  • Page 10 2.1 Electrical connection and precautions CHECK THAT THE VOLTAGE AND THE FREQUENCY OF THE MAINS MATCH THE RATINGS ON THE NAME PLATE OF THE APPLIANCE POSITIONED ON THE INNER EDGE OF THE DOOR. THE PLUG ON THE SUPPLY CORD AND THE CORRESPONDING SOCKET OUTLET MUST BE OF THE SAME TYPE AND MEET THE REGULATIONS IN FORCE.
  • Page 11 AN OMNIPOLAR CIRCUIT BREAKER IN OVERVOLTAGE PROTECTION CLASS III MUST BE INSTALLED IN AN EASILY ACCESSIBLE POSITION ON THE POWER SUPPLY LINE. THE CONNECTION TO THE MAINS MUST BE CARRIED OUT BY A QUALIFIED TECHNICIAN IN ACCORDANCE TO THE SCHEME SHOWN BELOW AND THE REGULATIONS IN FORCE.

  • Page 12: Description Of The Controls

    3. Description of the controls Front panel All the dishwasher control are grouped on the front panel. Programming and option selection are only possible with the door closed. ON/OFF BUTTON SELECTION PROGRAM BUTTON PROGRAM PHASE INDICATOR LIGHTS START/PAUSE BUTTON PROGRAM STARTED/STOP INDICATOR LIGHT (*) PROGRAM DELAY BUTTON PROGRAM DELAY LIGHT AUTOMATIC OPENING DOOR BUTTON...
  • Page 13 SETTING THE WASHING PROGRAM This dishwasher has 10 wash programs as per the following 2 pages. To select the most suitable program for the dishes to be washed refer to the table below, which indicates the most appropriate program according to dish type and degree of soiling.
  • Page 14 ADVANCE PROGRAMS (see relevant section for explanation of functioning modes) DURATION CONSUMPTION PROGRAMME LOAD CROCKERY AND PROGRAM NUMBER E MINUTI POWER CUTLERY PROGRESS WATER SYMBOL LITRES KWh (1) RAPID 27’ Dishes with light dirt, Wash at 38° C 0,70 washed immediately after Rinse at 50°...
  • Page 15 Washing programs The dishwasher is equipped with a control panel an and 3-FIGURE DISPLAY (12), “section 3.1” described in chapter "3. Description of the controls", from which it is possible to carry out all the power switch-on, switch-off and programming operations. Before starting a washing program make sure that: •...
  • Page 16 ADVANCE PROGRAMS OPTION These 5 extra programs in addition to the previous ones can be selected directly using the program selector button. This button must be pressed (the light comes on) after selection of the “main” program (1,2,3,4 or 5). This function is retained in the memory, so the button has to be pressed again (the light goes out) if the user wishes to execute one of the 5 main programs at the next cycle.
  • Page 17 DELAYING THE PROGRAM The PROGRAM DELAY button (6) can be pressed to delay the start of the washing program by up to 24 hours. This means that the dishwasher can be operated at the time of day of your choice. Press the PROGRAM DELAY button (6) again;...
  • Page 18 If it is necessary to open dishwasher door during the washing cycle, there will be a 1-minute delay before the program can be resumed. After correctly closing the door, press the START/PAUSE button (4) again. This operation may negatively affective the progress of the washing cycle.

  • Page 19: Operating Instructions

    4. Operating instructions Once the dishwasher has been correctly installed, prepare for use as follows: • Add the rinse aid and detergent. Using the rinse aid and detergent dispensers detergent rinse dispensers are situated on the inner part of the door: the detergent dispenser is on the left, and the rinse aid dispenser is on the right.
  • Page 20 ADJUSTING THE RINSE AID DISPENSER SETTING The dishwasher is factory set for medium water hardness. However it possible to change the setting by turning the dispenser’s selector to the desired position: the amount of rinse aid dispensed is proportional to the selector position.
  • Page 21 • When a program with hot prewash is selected (see program table), extra detergent must be placed in the cavity G/H. • Use only detergents specially formulated for dishwashers. For optimal washing results it is important to use a good quality detergent. •...
  • Page 22 The introduction of detergent into the rinse aid dispenser, even in liquid form, will damage the dishwasher. General warnings and recommendations Before using the dishwasher for the first time, it is advisable to read the following recommendations concerning dish types to be washed and their loading.
  • Page 23 • Make sure that the dishes are securely in place so that they cannot tip over or obstruct the rotation of the spray arms during the washing cycle. • Do not place very small objects in the baskets as these could fall and obstruct the spray arms or the wash pump.
  • Page 24 Using the baskets The dishwasher has a capacity of 15 place-settings, including serving dishes. LOWER BASKET The lower basket receives the full force of the lower spray arm, and should therefore be used for the “toughest” items with a heavier degree of soiling.
  • Page 25 Supports for cups and long objects (ladles, spoons, etc.), in the rear; can be tipped to the vertical position when not in use. Wine glass insert. Support for long-stem glasses. When lifted out of the stowed position (0) it snaps into three different positions (1-2- 2-position fold-down supports (1-2).
  • Page 26 To lie completely flat, lift the end and turn it towards you so that the retainer F rotates into place above point S. LOADING THE LOWER BASKET Carefully load flat plates, soup plates, dessert and serving dishes, positioning them vertically. Pots, pans and their covers must be loaded upside down.
  • Page 27 FLEXIBLE SPLIT CUTLERY TRAY This comprises two independent sliding, pull-out tray racks for easier loading/unloading of cutlery. Various loading systems and configurations are possible. For example, tea cups can be loaded with the right-hand rack set in the low position, while the left-hand rack or both can be removed to allow large dishes to be put in the top basket...
  • Page 28 STANDARD CUTLERY BASKET The basket has removable top grids into which items of cutlery should be inserted to keep them properly spaced and allow water to pass between them effectively. The top grids and central lid are in the bag of accessories.
  • Page 29 UPPER BASKET It is recommended to load the upper basket with small- or medium-sized items such as glasses, small plates, tea or coffee cups, shallow bowls and light objects made from heat resistant plastic. If the upper basket is used in the lowermost position, it can also be loaded with serving dishes, provided they are only slightly soiled.
  • Page 30 Accessories on upper basket: Supports for cups or long objects (ladles, spoons…), on the left; can be tipped to the vertical position when not in use. Long-stemmed glass holder, on the left; to use, simply lift and fix onto the hooks provided. Cutlery racks, on the right, designed for knives and teaspoons;...
  • Page 31 ADJUSTING THE UPPER BASKET The height of the top basket can be adjusted to allow large dishes or pans to be placed in the bottom basket. It is a third level adjustable upper basket and therefore can be adjusted to 3 different levels. The sides of the basket must always be set at the same height.

  • Page 32: Cleaning And Maintenance

    5. Cleaning and maintenance Before carrying out any work, always unplug the appliance from the electrical supply or switch off the all-pole disconnection device. General warnings and recommendations Avoid the use of acidic or abrasive detergents. Clean the outer surfaces and door-lining of the dishwasher regularly using a soft cloth moistened with water or with a normal detergent suitable for painted surfaces.
  • Page 33 CLEANING THE FILTER UNIT • It is advisable to periodically inspect the centre filter C and, if necessary, to clean it. To remove the filter, grip the tabs, turn them anticlockwise and lift upwards; • push the centre filter D from the underside to remove it from the micro-filter: •...
  • Page 34 BEFORE STARTING THE DISHWASHER AFTER PROLONGED DISUSE: • Check that there are no deposits of sludge or rust inside the water pipe: if there are, allow the water to run from the water supply tap for a few minutes. • Plug the power cord back into the socket.
  • Page 35 If the dishes fail to dry or remain dull, check that: • there is rinse aid inside the special container; • the rinse aid dispenser setting is correct; • the detergent used is of good quality and has not lost its effectiveness (for example, through incorrect storage, with the box left open).

  • Page 36: Troubleshooting

    6. Troubleshooting The dishwasher is equipped with a self-diagnostics system that is capable of detecting and signalling a number of possible faults TABLE OF FAULTS DETECTED BY THE SELF-DIAGNOSTICS SYSTEM FAULT DESCRIPTION The anti-flooding system (where present) has been tripped. The water level limitation system has tripped.
  • Page 37 TECHNICAL DATA Width 598 mm Depth measured flush with the 570 mm outer edge of the control panel Height 868 mm Capacity 15 Standard place settings Water supply pressure min. 0,05 - max. 0,9 MPa (min. 0.5 – max. 9 bar) Electrical characteristics See rating plate...
  • Page 38 We appreciate your feedback. Please review our products on www. blanco-australia.com...
  • Page 39 The product will be repaired or replaced at the option of Blanco, and all costs of installation, removal, cartage, freight travelling expenses and insurance are to be paid by the consumer.
  • Page 40 Blanco. HOW TO CLAIM OUR WARRANTY You will need to contact Blanco in Australia or New Zealand by using the contact details below. IN AUSTRALIA Blanco is distributed by Shriro Australia Pty Ltd...
Save PDF