Lincoln Electric AC-225C Specification Sheet page 78

Automatic Wire Feeders
Automatic Wire Feeders Options
See "Recommended General Options" pgs. 149-171 for descriptions.
NA-3 and NA-4
General Options
Control Cables and Adapters
See Control Cables and Adapters chart in the "Recommended General
Options" section.
K2163-35 Weld Power Cable, Lug to Lug (4/0), 35 ft.
K2163-60 Weld Power Cable, Lug to Lug (4/0), 60 ft.
K1842-110 Weld Power Cable, Lug to Lug (4/0, 600A, 60%), 110 ft.
K234-26 Control to Head Cable Extension, 26 ft.
K234-46 Control to Head Cable Extension, 46 ft.
K235-5 Control to Head Cable Extension, 5 ft. .
K235-26 Control to Head Cable Extension, 26 ft.
K235-46 Control to Head Cable Extension, 46 ft.
K231-5/64 Contact Nozzle Assembly for 5/64" (2.0 mm) Wire
K231-3/32 Contact Nozzle Assembly for 3/32" (2.4 mm) Wire
K231-1/8 Contact Nozzle Assembly for 1/8" (3.2 mm) Wire
K231-5/32 Contact Nozzle Assembly for 5/32" (4.0 mm) Wire
K231-3/16 Contact Nozzle Assembly for 3/16" (4.8 mm) Wire
K231-7/32 Contact Nozzle Assembly for 7/32" (5.6 mm) Wire
K226R Contact Jaw Assembly for 1/8-7/32" (3.2-5.6 mm) Wire
K148A Positive Contact Nozzle Assembly
for 3/32-1/8" (2.4-3.2 mm) Wire
K148B Positive Contact Nozzle Assembly
for 5/32-3/16" (4.0-4.8 mm) Wire
K149-3/32 Nozzle Extension for 3/32" (2.4 mm) Wire
K149-1/8 Nozzle Extension for 1/8" (3.2 mm) Wire
K149-5/32 Nozzle Extension for 5/32" (4.0 mm) Wire
K386 Narrow Gap Deep Groove Nozzle
S17545 Insulation Jacket
K285 Concentric Flux Cone Assembly
M13454 Flux Cone
K225 Sub Arc Twinarc ® Nozzle for 5/64", 3/32"
K129-1/16 Tiny Twinarc ® Assembly for 1/16" (1.6 mm) Wire
K129-5/64 Tiny Twinarc ® Assembly for 5/64" (2.0 mm) Wire
K129-3/32 Tiny Twinarc ® Assembly for 3/32" (2.4 mm) Wire
K281 Tiny Twinarc ® Solid Wire Straightener
K223 Solenoid Kit
K221 Start Controls P.C. Board for Automatics
K245 Crater Fill Controls P.C. Board for Automatics
K325HCS TC-3 High Capacity Travel Carriage,
Multiple Heads & Controls, 5-75 ipm.
K325HCF TC-3 High Capacity Travel Carriage,
Multiple Heads & Controls, 15-270 ipm.
K299 Wire Reel Assembly for 50-60 lb. Coils
(without high frequency insulation).
K162-1 Spindle Kit, 2 Inch Hub
K29 Vertical Lift Adjuster (4")
K96 Horizontal Adjuster (2")
K278-1 Spreadarc ™ Oscillator
K310 Flux Screen with Air-Driven Vibrator
K58 Magnetic Flux Screen Separator
— Fume Extraction System
80
NA-5
General Options
Control Cables and Adapters
See Control Cables and Adapters chart in the "Recommended General
Options" section.
K2163-35
K2163-60
K1842-110
K338-5
K338-11
K338-26
K338-46
K335-26
K231-5/64
K231-3/32
K231-1/8
K231-5/32
K231-3/16
K231-7/32
K226R
K148A
K148B
K149-3/32
K149-1/8
K149-5/32
K386
S17545
K285
M13454
1/8" Wire
&
K225
K129-1/16
K129-5/64
K129-3/32
K281
K373
K349
K223
K325HCS
K325HCF
K299
K162-1
K29
K96
K278-1
K334
K337-10
K337-100
K336
K219
K310
K58
—
www.lincolnelectric.com/wire-feeders
Weld Power Cable, Lug to Lug (4/0), 35 ft.
Weld Power Cable, Lug to Lug (4/0), 60 ft.
Weld Power Cable, Lug to Lug (4/0, 600A, 60%), 110 ft.
Control to Head Cable Extension, 5 ft.
Control to Head Cable Extension, 11 ft.
Control to Head Cable Extension, 26 ft.
Control to Head Cable Extension, 46 ft.
Control to Head Cable Extension, 26 ft.
Contact Nozzle Assembly for 5/64" (2.0 mm) Wire
Contact Nozzle Assembly for 3/32" (2.4 mm) Wire
Contact Nozzle Assembly for 1/8" (3.2 mm) Wire
Contact Nozzle Assembly for 5/32" (4.0 mm) Wire
Contact Nozzle Assembly for 3/16" (4.8 mm) Wire
Contact Nozzle Assembly for 7/32" (5.6 mm) Wire
Contact Jaw Assembly for 1/8-7/32" (3.2-5.6 mm) Wire
Positive Contact Nozzle Assembly
for 3/32-1/8" (2.4-3.2 mm) Wire
Positive Contact Nozzle Assembly
for 5/32-3/16" (4.0-4.8 mm) Wire
Nozzle Extension for 3/32" (2.4 mm) Wire
Nozzle Extension for 1/8" (3.2 mm) Wire
Nozzle Extension for 5/32" (4.0 mm) Wire
Narrow Gap Deep Groove Nozzle
Insulation Jacket
Concentric Flux Cone Assembly
Flux Cone
Sub Arc Twinarc ® Nozzle for 5/64", 3/32" & 1/8" Wire
Tiny Twinarc ® Assembly for 1/16" (1.6 mm) Wire
Tiny Twinarc ® Assembly for 5/64" (2.0 mm) Wire
Tiny Twinarc ® Assembly for 3/32" (2.4 mm) Wire
Tiny Twinarc ® Solid Wire Straightener
Analog Interface Procedure Control
Multi-Procedure Kit
Solenoid Kit
TC-3 High Capacity Travel Carriage,
Multiple Heads & Controls, 5-75 ipm.
TC-3 High Capacity Travel Carriage,
Multiple Heads & Controls, 15-270 ipm.
Wire Reel Assembly for 50-60 lb Coils.
(without high frequency insulation).
Spindle Kit, 2 Inch Hub
Vertical Lift Adjuster (4")
Horizontal Adjuster (2")
Spreadarc Oscillator
™
Start or Crater Module
Weld Timer Module (maximum time 9.99 seconds)
Weld Timer Module (maximum time 99.9 seconds)
Remote Interface Module
Automatic Flux Hopper Assembly
Flux Screen with Air-Driven Vibrator
Magnetic Flux Screen Separator
Fume Extraction System