Datalogic DS6300 Reference Manual page 28

2
4. Mount the scanner at an angle of 16°, as indicated in figure below, in order to obtain an
angle of 90° between the two scan lines. This guarantees an omni directional reading of
the barcode, if the code label satisfies the ACR™ 3 conditions (see par. 4.1).
The DS6300 with the GFX-60 can be mounted over a conveyor in different positions.
The following picture illustrates the suggested position offering the best compromise between
width and height of the reading area:
The Central Reading position allows maximizing the reading distance (height) when the width
of the reading area is not critical (narrow conveyors). In this case a complete reading on the
central part of the conveyor plane is guaranteed.
To better exploit the scanner reading performance when GFX-60 is
mounted, the use of a dedicated recipe is recommended.
NOTE
For details about reading performances of the DS6300 with GFX-60 see par. 4.2.3.
14
Figure 23 – Central Reading Position
DS6300