Brother BAS-311G Instruction Manual page 37

5. USING THE OPERATION PANEL (BASIC OPERATIONS)
3
<Changing modes>
4
Ending setting mode
THREAD/CLAMP indicator switches off
Presser foot operation
During standby
When lowered
While sewing
5033Q
30
Press the
The sewing machine will switch to intermittent presser foot height
setting mode.
• " 4" will appear in the PROGRAM No. display, and the work
clamp will rise to the setting value that appears in the menu
display.
(Intermittent presser foot height setting: 0.0 − 10.0)
Press the
height.
• The presser foot will rise or drop to the height of the new value
that has been set.
NOTE:
Solenoid specifications
" 1" Threading mode
↑ ↓
" 2" Work clamp height setting mode
↑ ↓
" 3" Intermediate work clamp height setting mode (*)
↑ ↓
" 4" Intermittent presser foot height setting mode
Pneumatic specifications
" 1" Threading mode
↑ ↓
" 4" Intermittent presser foot height setting mode
Press the THREAD/CLAMP key.
• The setting values will be memorized.
• The work clamp will return to where it was before setting mode
was started.
BAS-311G, BAS-326G
key.
or key to set the intermittent presser foot
After making the setting, be sure to turn the pulley once by
hand and check that the presser foot does not touch the
needle bar.
* When memory switch No. 003 is set to "2"
1
Intermittent presser foot lift amount
2
Intermittent presser foot height
The settings can be made by the
above operations.
3
Intermittent stroke
Refer
intermittent stroke" when making the
adjustment.
to "10-14. Changing
4960Q
4448Q
the