Thread Tension; Lower Thread Tension; Upper Thread Tension - Brother BAS-311G Instruction Manual

Direct drive programmable electronic pattern sewer
Hide thumbs Also See for BAS-311G:
Table of Contents

Advertisement

4. PREPARATION BEFORE SEWING

4-5. Thread tension

[Thread tension reference]
Specifications
Upper thread
Lower thread
Upper thread tension (N)
Lower thread tension (N)
Pre-tension (N)
Needle
Normal sewing speed

4-5-1. Lower thread tension

Weaker

4-5-2. Upper thread tension

22
Heavy-weight materials (-01)
#20 or similar
#20 or similar
1.4 − 1.8
DP x 17 #19
2,000 rpm
Stronger
Stronger
Weaker
Stronger
Weaker
Medium-weight materials (-02)
#50 or similar
#60 or similar
0.2 − 0.3
0.1 − 0.3
DP x 5 #16
Adjust the thread tension to the weakest possible tension by
turning the thread tension nut (1) until the bobbin case will
not drop by its own weight while the thread end coming out
of the bobbin case is held.
2536Q
1. Turn the tension nut (1) (main tension) to adjust the
tension as appropriate for the material being sewn.
2. Use the tension nut (2) (sub tension) to adjust the upper
thread trailing length to about 40 mm.
5025Q
BAS-311G, BAS-326G
0.8 − 1.2
2,000 rpm

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bas-326g

Table of Contents