Using Cf Cards; Notes On Handling Cf Cards (Sold Separately); Structure Of A Cf Card Folder - Brother BAS-311G Instruction Manual

Direct drive programmable electronic pattern sewer
Hide thumbs Also See for BAS-311G:
Table of Contents

Advertisement

7. USING CF CARDS

7-1. Notes on handling CF cards (sold separately)

• Use a CF card with a memory capacity of 32, 64, 128 or 256 MB.
• Do not disassemble or modify the CF card.
• Do not bend, drop or scratch CF cards or place heavy objects on top of them.
• Avoid contact with liquids such as water, oil, solvents or drinks.
• Use and store CF cards in locations that are free from strong static electricity and electrical interference.
• Do not use or store CF cards in places where they may be subject to vibrations or shocks, direct sunlight, high
temperature or humidity or strong magnetic fields from equipment such as speakers, or places which are dusty from thread
scraps, etc.
• Do not subject CF cards to shocks or impacts or remove them from the sewing machine while data is being loaded or
written.
• The data on the CF cards may become lost or corrupted due to some malfunction or accident. It is recommended that you
make a backup of important data.
• CF cards should only be removed after the power for the sewing machine has been turned off.
• CF cards are already formatted when they are purchased, and so you should not reformat them.
• The recommended CF cards are commercially-available ones from SanDisk or HAGIWARA SYS-COM. CF cards from
other manufacturers can be used, but different formatting methods may mean that loading from or writing to such cards
may not be possible.
For more information, refer to the documentation provided with the CF card.
* This product is compatible with CF cards that have been formatted using the FAT16 method. Cards that have been
formatted using the FAT32 method cannot be used.
TM
* CF
is a trademark of SanDisk Corporation.
* Company names and product names appearing in this manual are trademarks or registered trademarks of the
respective owners. However, no TM or other similar symbols appear in the main text of this manual.

7-2. Structure of a CF card folder

\BROTHER\ISM\ISMSYS\ISM02MN.MOT
\BROTHER\ISM\ISMDB00\ISMMSW.SEW
*1
The underlined portion of the name of the \BROTHER\ISM\SMDB00 folder for sewing data can be changed by
changing the setting for memory switch No. 752 in order to change the folder name. Change the folder name if you
would like to store sewing data for different sewing machines on a single CF card. (Refer to the service manual for
details on memory switch No. 752.)
*1 \ISMUPG.SEW
\ISMHST.SEW
\ISMS0100.SEW
\ISMS0101.SEW
\ISMS0102.SEW
BAS-311G, BAS-326G
: Control program
: Memory switch data
: User program data
: Error log data
: Sewing data P No. = 100
: Sewing data P No. = 101
: Sewing data P No. = 102
7. USING CF CARDS
45

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bas-326g

Table of Contents