Lincoln Electric COMMANDER SVM145-B Service Manual page 104

F-48
CONTROL TRANSFORMER TEST (continued)
SCREWS
FRONT
CONTROL
PANEL
TEST PROCEDURE
1. This test should be performed with the
engine off.
2. Using the 3/8" wrench, remove the four
screws holding the front control panel to the
case top and sides. See Figure F.20. (There
are two screws on the top and one on each
side.)
3. Carefully lower the front control panel.
TROUBLESHOOTING & REPAIR
FIGURE F.20 – FRONT CONTROL PANEL REMOVAL
COMMANDER 300
SCREW
F-48