Operating Instructions - Ada AngleMeter 45 Operating Manual

AngleMeter 45
5

OPERATING INSTRUCTIONS

Power
Press the ON/OFF button (12) for ~1 sec to turn on the display and backlight.
The angle (8) which represents the angle between the arms (13 and 16) will be displayed in degrees (°).
The display will automatically power off after ~5 min of non-use.
The backlight will automatically power off after ~1 min of non-use. Any button press or angle change will cause the backlight to
power on if the display is powered on.
The battery life icon (1) will appear when there is ~2 hours of battery life remaining.
Press the ON/OFF button (12) for ~2 sec to power off the display.
Invert Display
With the display powered on, press the ON/OFF button (12) for ~1 sec to invert the display. Press again for ~1 sec to return display
to normal position.
Re-calibrate
If the unit is dropped or you suspect inaccuracy of the product, you can re-calibrate the zero point. With the power on and the arms (13
and 16) closed together, press the ON/OFF (12) and HOLD/SUP (11) buttons simultaneously for ~1 sec to reset the angle to 0°.
Hold
Press the HOLD/SUP button (11) for ~1 sec to lock the current angle shown on the display. The HOLD indicator (3) will appear
and flash on the display. Press (11) again for ~1 sec to unlock the displayed angle.