10.5. Installing battery / additional hard drive
(optional)
You have the option of exchanging the optical drive for an additional hard drive or
a battery.
PLEASE NOTE!
The additional hard drives/batteries are not included in the
delivery.
10.5.1. Safety instructions
•
Switch off your notebook before exchanging the optical drive.
•
Do not operate or transport your notebook without an optical drive or a second
hard drive/battery installed.
•
Do not leave the notebook unsupervised without an optical drive or second
hard drive/battery so that no objects can fall into the open slot and damage the
notebook as a result.
•
Ensure after exchanging the device that the relevant module has been
correctly inserted.
10.5.2. Exchanging for an additional hard drive/battery
Proceed as follows:
` Switch off the notebook by properly shutting it down.
` Separate the notebook from the mains power supply and remove all connection
cables.
` Turn the notebook over and place it on a stable and flat surface to prevent the
notebook from falling down.
` Now slide the release latch for the removable drive into the "Unlock" position
and remove the optical drive.
` Insert the additional hard drive/battery into the open slot until the device clicks
into place and slide the release latch for the removable drive into the "Lock"
position.
` Start your notebook.
` The second hard drive will be detected and integrated by the operating system
if it has already been formatted or contains data.
38 of 71