PGO BR-500 Service Manual page 23

-
Remove the Transmission
cover
- Unscrew the two screws shown in the figure
to remove the air conveyor.
Tightening torque:
Air conveyor screws: 11 ~12 Nm
- Check that the roller is free from wear and
that it rotates freely.
- Remove the fastening screw by a 13-mm
wrench.
- Remove the roller and the bearing.
N.B.: If the roller does not rotate
freely, it requires replacement.
PGO BR-500 ENGINE
P.10-4
Automatic Transmission