Fujitsu fi-4120C Operator's Manual page 83

3. Remove the jammed document.
•
ATTENTION
•
4. Press down on the center of the ADF to return it to its original position and lock the
ADF button.
Press center of
ADF
Make sure that the ADF is completely closed. When it is not completely
ATTENTION
closed, document jams or feeding errors may occur.
When the scanning is completed or canceled, the documents might
ATTENTION
remain inside the ADF even though any error message is not dis-
played.
Follow the procedure below to remove the documetns remaining in the
ADF.
Staples, paper clips, etc. cause document jams. Be sure to fully check
the document and feed path, and remove any small metal objects such
as these.
Also, before you start scanning, be sure to remove any staples, clips,
etc. from the document.
Take care not to pull the pick springs when removing jammed docu-
ments.
1. Remove all documents from the ADF paper chute.
2. Open the ADF by pushing down the ADF button.
3. Remove the remaining documents.
4. Push in the center of the ADF to close it until the ADF button is
locked.
5.1 Removing Jammed Documents
5