Table of Contents
Advertisement
1.3 Features
OSD Menu
Support Chinese and English OSD menu, and can display the speed dome information and
status, also can setup speed dome functions and features.
Soft Address
Support soft address function. Soft address can be set in OSD menu, and speed dome can be
controlled by keyboard and PC software with different soft address.
Multi Protocol
Support Pelco_P and Pelco_D protocol
Focus/Rotation speed auto match
Support automatically adjusts PTZ's horizontal and vertical speed according to the focus
close/far, which will make it easier for manual subject tracking.
Dome address setup
Support 255 camera address， and it only responds to the control instructions consistent with its
address. Use code switch on the dome decoder board to make address setup.
Set and call preset position
Preset position is to store the present PTZ's horizontal angle, vertical angle and camera focus，
and when it is needed, camera can call these parameters to rotate the camera to this position.
Operator can use keyboard to call preset positions and 220 preset positions are supported.
Auto Scan
Operator can use the keyboard to set left/right boundary to let the dome rotate between left and
right boundary at the preset speed。This dome supports 4 auto scan.
6
Advertisement
Table of Contents
