jetek pro jts-322dn User Manual page 24

MOTION
――――――――――――――
<PRESET>
<SCAN>
<SEQUENCE>
<PATTERN>
<ZONES>
<TIMING ACTION>
<AUTO TRACKING>
BACK
EXIT
A1.ZONE INFORMATION
B1.ZONE NO.
Move the cursor to ZONE NO. and press the key IRIS ON(key on control keyboard) to enter the
edition mode of zone No., move the joystick upward and downward to select number. Then press
IRIS ON to confirm.
B1. TITLE
Move the cursor to TITLE and press IRIS ON to enter the edition mode of zone title.
C1.<LEFT LIMIT>
Move the cursor to <LEFT LIMIT> and press IRIS ON to start setting the left limit of the current
zone. Then the sentence "PRESS IRIS ON TO CONFIRM"will appear on the screen. Move the
joystick and press IRIS ON to confirm.
E1. <RIGHT LIMIT>
Move the cursor to <RIGHT LIMIT> and press IRIS ON to start setting the right limit of the
current zone. Then the sentence "PRESS IRIS ON TO CONFIRM"will appear on the screen.
Move the joystick and press IRIS ON to confirm.
F1.DELETE
Press IRIS ON to delete the current zone.
F.TIMING ACTION
ZONES
――――――――――――――
ZONE IS NOT SET
－
ZONE NO. : 1
TITLE NO. : ZONE 1
<LEFT LIMIT>
<RIGHT LIMIT>
DELETE
BACK
EXIT
24
A1
－
B1
C1
D1
E1
F1