Table of Contents
Advertisement
As is shown by the picture, thread the power cable, video cable,RS-485data cable
4、
through the bracket, push speed dome into bracket connection, and tighten 3 internal
hexagon screws
5、Cable connection
6. Put the cables (including power, video cable, RS 485 and ground line) through the bracket.
Then fix the dome base and the bracket with 4 screws and lock with ￠8 plain cushion and
nut.
Note: Put the bracket away from line and make sure fixed of nut. If dome
installed in outside, please pay more attention on waterproof.
11
Advertisement
Table of Contents
