Table of Contents
Advertisement
7
Do not install the unit in humid, dusty or smoky places may cause fire or electric shock. This
could avoid fire, electric shock or personal injury caused by falling objects.
8
If the device has abnormal smell or smoke, please stop using the product. You should
immediately unplug the power and service center. If you continue to use at this time may
cause fire or electric shock
9
If the product working improperly, please contact the dealer or the nearest service center. Do
not disassemble or in any way to change this product. (Due to an unauthorized user to
disassemble or repair the problems caused within the warranty does not cover
10 While cleaning, do not splash water droplets directly on the product components. (Doing so
may cause fire or electric shock)
11 Do not place the product opposite the air flow position. Otherwise, the temperature difference
between inside and outside will cause moisture condensation within the dome。
12 If you install the product in cold area (such as cold storage), it must be sealed with silicone
wire leads, prevent the outside air from dome. Otherwise, high humidity air outside may flow
into the machine case, and internal and external temperature differences cause the product to
moisture or water vapor inside.
Notice
1
Do not drop objects on the product or the product gets affected. Keep it away from vibration
or magnetic interference.
2
Do not install the product at high temperature (over 50 ° C), low temperature (below -50 ° C),
or high humidity, and if doing so would result in fire electric shock。
3
If you move the product installed, before moving or reinstall, be sure to turn off the power。
4
When a lightning storm, unplug the power plug from the socket, if negligence may result in
fire or damage to the product。
5
Avoid direct sunlight or heat source, if negligence may bring the fire
6
Installed in a well ventilated place.
7
Avoid direct exposure to the camera in a sunny place, otherwise it will undermine the CCD
sensor.
8
To prevent the machine from rain or splashing water, do not place vases, containers of liquid
on the machine.
9
Due to frequent plugging and unplugging of the power cord, install the device in places easy
for removal. While users operate on the machine, please ensure the plug firmly in the power
outlet in order to ensure stable operation。
10 For storage in high humidity environments, shielding may be moisture inside the dome cover.
Dome cover is required to open, and clean with a soft, dry cloth before installation。
11 Please use the products according to working environment requirement:
Power supply
Communication Interface
Ambient temperature
Environment Humidity
Atmospheric pressure
AC24V/2.0A
RS-485
－35℃～55℃
<95％（no condesing）
86～106KPa
4
Advertisement
Table of Contents
