RAID Setting Guide
5-1
Chapter 5. RAID Setting Guide
For detail RAID introduce and concept, you can found it on our WEB site "Technological Terms", or
you can search the concerning information on Internet. We do not description it on this manual.
5-1. The features of RAID on the AT7-MAX2
The AT7-MAX2 supports Striping (RAID 0), Mirroring (RAID 1), or Striping/Mirroring (RAID 0+1)
operation. For the striping operation, the identical drives can read and write data in parallel to increase
performance. The Mirroring operation creates a complete backup of your files. Striping with Mirroring
operation offers both high read/write performance and fault tolerance although requiring 4 hard disks in
order to do so.
5-2. RAID SETUP on the AT7-MAX2
Enter Advanced BIOS Features in the BIOS setup. Change the settings of "First Boot Device", "Second
Boot Device" and "Third Boot Device" to read ATA133RAID. See Figure 4-1.
Figure 4-1. RAID settings in BIOS
User's Manual