Panasonic NV-GS24EG Service Manual page 49

Hide thumbs Also See for NV-GS24EG:
Table of Contents

Advertisement

GS24EG NV-GS26GK / NV-GS27E NV-GS27EB / NV-GS27EE NV-GS27EF / NV-GS27EG NV-GS27EP / NV-GS27GC NV-GS27GN / NV-GS37E NV-GS37EB / NV-GS37EG NV-GS37EK / NV-GS37EP NV-GS47EE
V-GS47GC NV-GS57EE / NV-GS57GC NV-GS58GK
15. Removal of CCD P.C.B., Filter Rubber and Optical Filter
CAUTION:
1) When removing the CCD P.C.B., take care that the
Optical Filter does not fall out.
2) Use extreme caution when removing the CCD P.C.B.
as it is easily damaged by static electricity. Use a Wrist
Strap while removing and installing.
3) Do not touch the CCD window surface.
Installation of CCD P.C.B., Filter Rubber and Optical
Filter
Install in order shown below.
1) Install the Optical Filter correctly.
Note: Make sure that no dust gets on the Optical Filter
or in the Lens Unit. Clean the Optical Filter with lens
cleaning paper dampened with lens cleaner if
necessary.
2) Install the Filter Rubber on the Optical Filter correctly as
shown below.
Note: Make sure that no dust gets on the Filter
Rubber.
3) Install the CCD P.C.B. into the Lens Unit. Then, tighten
the 2 Screws (536).
Note: Do not touch the Lens Surface. Clean the surface
with lens cleaning paper dampened with lens cleaner
if necessary.
16. Installation of Zoom Motor Unit/Focus Motor Unit
Install the Zoom Motor Unit/Focus Motor Unit so that the
Shaft of the Zoom Motor Unit/Focus Motor Unit is set in the
Holder.
Zoom
Motor
Unit
Focus
Motor
Unit
shaft
holder
bosses
holder
bosses
shaft
Fig. D16
17. Installation of EVF Slide Piece, EVF Base Frame and EVF
Frame
1) Pass the EVF F.P.C. through the EVF Base Frame hole.
2) Install the EVF Slide Pieces into the EVF Base Frame
from both sides.
3) Slide the EVF Case Ass'y to the end so that the ribs are
inserted into the holes of the EVF Slide Pieces.
4) Locate the threaded holes, and tighten the 2 Screws
(450).
5) After installing, confirm the EVF moves correctly.
6) Install the EVF Frame with the 2 Screws (537).
7) Hook both sides of the F.P.C. to the EVF Base Frame.
EVF Base Frame
EVF Case Ass'y
Slide
(threaded hole)
EVF Base Frame
537
<Bottom View>
49
hole of EVF
rib
Slide Piece
hole
EVF F.P.C.
hole of EVF
rib
Slide Piece
<Top View>
450
EVF Slide Piece
<Side View>
Hooking Portion
EVF Frame
Fig. D17
537

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents