Panasonic NV-GS24EG Service Manual page 43

GS24EG NV-GS26GK / NV-GS27E NV-GS27EB / NV-GS27EE NV-GS27EF / NV-GS27EG NV-GS27EP / NV-GS27GC NV-GS27GN / NV-GS37E NV-GS37EB / NV-GS37EG NV-GS37EK / NV-GS37EP NV-GS47EE
V-GS47GC NV-GS57EE / NV-GS57GC NV-GS58GK
4. Removal of R Shaft Case Unit & LCD Ass'y
Take care not to damage the LCD open/close Switch.
1) Remove the 5 Screws (533, 537), and remove the R
Shaft Case Unit & LCD Ass'y.
Installation of R Shaft Case Unit & LCD Ass'y
1) Install the R Shaft Case Unit & LCD Ass'y so that the tab
is inserted into slot.
2) Tighten 5 Screws (533, 537).
537
tab
533
5. Installation of Lens Ass'y
Take care not to damage the motor leads.
1) Install the Lens Ass'y with the 3 bosses and 2 Screws
(537).
2) Connect the F.P.C.s to Connector FP701 and FP301,
then place the sheet on Connector FP301.
Lens Ass'y
Curve to the inside
537
537
533
R Shaft Case Unit & LCD Ass'y
Fig. D4
boss
537
sheet
537
boss
FP301
FP701
Fig. D5
6. Installation of EVF Unit, Camera P.C.B.
Take care not to damage the EVF standby Switch.
1) Install the EVF Unit with the boss and Screw (537).
2) Connect the F.P.C. to Connector FP9902 or FP9903
(For models with B/W EVF).
Camera P.C.B.
LCD
open/close
Switch
boss
43
EVF Unit
537
boss
EVF Standby
Switch
FP9902 (For models with Color EVF)
FP9903 (For models with B/W EVF)
<Foil Side>
Fig. D6