Panasonic WV-SW158 Operating Instructions Manual page 91

•
AWC: Selects the automatic white balance control mode. This adjustment is suitable for a location where
a light source is stable. Operating color temperature range is approx. 2,000 K to 10,000 K.
•
Default: ATW1
Note
•
Under the following conditions, color may not be faithfully processed. In these cases, select "AWC".
–
When shooting a subject whose major part is a thick color
–
When shooting blue sky or sun at sunset
–
When shooting a subject whose luminance is too low
•
When "AWC" is selected, click the [Set] button.
[Red gain]
Adjust the red color of images.
When the cursor is moved in the "+" direction, the red color will become thicker. When the cursor is moved in
the "-" direction, the red color will be thinner. Click the [Reset] button to reset the setting to the default.
•
Default: 128
[Blue gain]
Adjust the blue color of images.
When the cursor is moved in the "+" direction, the blue color will become thicker. When the cursor is moved
in the "-" direction, the blue color will be thinner. Click the [Reset] button to reset the setting to the default.
•
Default: 128
[DNR]
The digital noise reduction function reduces noise automatically under the condition of low illuminance. Select
an effect level "High" or "Low" for the digital noise reduction.
•
High: High DNR, increases afterimage
•
Low: Low DNR, reduces afterimage
•
Default: High
[Chroma gain level]
Adjusts the chroma level (color density).
When the cursor is moved in the "+" direction, the colors will become thicker. When the cursor is moved in the
"-" direction, the colors will be thinner. Click the [Reset] button to reset the setting to the default.
•
Default: 128
[Aperture level]
Adjust the aperture level (outline compensation).
Images will be sharper when the cursor is moved in the "+" direction, and will be softer when the cursor is
moved in the "-" direction. Click the [Reset] button to reset the setting to the default.
•
Default: 16
[Pedestal level]
Adjust the black level of images by moving the cursor.
When the cursor is moved to the "+" direction, images will become brighter. When the cursor is moved to the
"-" direction, images will be darker. Click the [Reset] button to reset the setting to the default.
•
Default: 128
[Fog compensation]
Select "On" or "Off" to determine whether or not to activate the fog compensation function. When "On" is
selected for "Super Dynamic(SD)" or "Adaptive black stretch", this setting is not available.
The fog compensation function can make dim images that have been affected by fog or other conditions clearer
using digital image processing.
11 Configure the settings relating to images and audio [Image/Audio]
Operating Instructions 91