Error Displays; Specifications - Clarion CX305 Owner's Manual

SiriusXM Advisory Messages
Message
The radio has detected a fault with the SiriusXM antenna. The antenna cable may be
either disconnected or damaged.
Verify that the antenna cable is connected to the SiriusXM Connect Vehicle Tuner.
CHK ANTENA Inspect the antenna cable for damage and kinks. Replace the antenna if the cable
is damaged.
SiriusXM products are available at your local car audio retailer or online at www.shop.
siriusxm.com.
The radio is having difficulty communicating with the SiriusXM Connect Vehicle Tuner.
The tuner may be disconnected or damaged.
CHEK TUNER
Verify that the SiriusXM Connect Vehicle Tuner cable is securely connected to the
radio.
The SiriusXM Connect Vehicle Tuner is having difficulty receiving the SiriusXM satellite
signal.
Verify that your vehicle is outdoors with a clear view of the sky.
Verify that the SiriusXM magnetic mount antenna is mounted on a metal surface on
the outside the vehicle.
NO SIGNAL
Move the SiriusXM antenna away from any obstructions. Inspect the antenna cable
for damage and kinks.
Consult the SiriusXM Connect Vehicle tuner installation manual for more information on
antenna installation. Replace the antenna if the cable is damaged. SiriusXM products
are available at your local car audio retailer or online at www.shop.siriusxm.com.
The radio has detected a change in your SiriusXM subscription status.
SUBSCRIPTIN Press the rotary knob to clear the message.
UPDATED
Visit www.siriusxm.com or call 866-635-2349 if you have questions about your
subscription.
The channel that you have requested is not a valid SiriusXM channel or the channel
that you were listening to is no longer available. You may also see this message briefly
CH UNAVAIL
when first connecting a new SiriusXM Connect Vehicle tuner.
Visit www.siriusxm.com for more information about the SiriusXM channel lineup.
The channel that you have requested is Locked by the radio Parental Control feature.
CHANNEL LOCKED See the Parental Lock/Unlock feature on page 10 for more information on the Parental
Control feature and how to access locked channels.

7. ERROR DISPLAYS

If an error occurs, one of the following displays is displayed.
Take the measures described below to solve the problem.
Display Cause
Disc is inserted incorrectly.
ERROR 3
Disc format not supported.
ERROR 5 Deck mechanism failure.
If an error display other than the ones described above appears, press the
problem persists, turn off the power and consult your store of purchase.
* When the button is pressed, frequencies of radio stations, audio settings, etc. stored
[RESET]
in the memory are cleared.
16
CX305
Description
Measure
Eject the disc then reload it properly.
Try another disc.
Consult your store of purchase.
button. If the
[RESET]

8. SPECIFICATIONS

FM Tuner
Frequency range: 87.9 - 107.9MHz
Usable sensitivity: 12dBf
Frequency response: 30Hz-15kHz
Stereo separation: 30dB(1kHz)
Signal/noise ratio: >55dB
AM Tuner
Frequency range: 530 - 1710KHz
Usable sensitivity (S/N=20dB): 30dBμ
CD Player
System: Disc digital audio system
Frequency response: 20Hz-20kHz
Signal/noise ratio: >94dB
Total harmonic distortion: Less than 0.1% (1kHz)
Channel separation: >60dB
MP3/WMA mode
MP3 sampling rate: 8 kHz to 48 kHz
MP3 bit rate: 8 kbps to 320 kbps / VBR
WMA bit rate: 8 kbps to 320 kbps
Logical format: ISO9660 level 1,2
Joliet file system
USB
Specification: USB 1.0/2.0
Playable audio format:
MP3(.mp3): MPEG 1/2/Audio Layer-3
WMA(.wma): Ver 7/8/9.1/9.2
Bluetooth
Specification: Bluetooth Ver. 2.1+EDR
Profile: HFP (Hands-free Profile)
A2DP (Advanced Audio Distribution Profile)
AVRCP (AV Remote Control Profile)
PBAP (Phone Book Access Profile)
Send/Receive Sensitivity: Class 2
Audio Amplifier
Maximum power output:
200W (50W x 4)
Speaker impedance: 4 (4 to 8 allowable)
Input
Audio input sensitivity:
High: 320mV (at 1V output)
Mid: 650mV (at 1V output)
Low: 1.3V (at 1V output)
(input impedance: 10 k or greater)
Aux-in level: ≤2V
General
Power supply voltage:
14.4VDC (10.8 to 15.6V allowable),
negative ground
Pre-Amp output voltage:
2.0V (CD play mode: 1kHz, 0dB, 10k load)
Fuse: 15A
Dimensions of the Main Unit:
178mm Width × 100mm Height × 160mm
Depth
6-2/3(width) × 2(Height) × 6-1/3(Depth)
Weight of the Main Unit: 3.72lb.(1.69kg)
Dimensions of the Remote Control unit:
43mm Width × 11mm Height × 113mm Depth
1-2/3(Width) × 2/5(Height) × 4-2/5(Depth)
Weight of the Remote Control Unit:
1.16oz. (36g) (including battery)
Note:
• Specifications and design are subject
to change without notice for further
improvement.
Power Output:
22W RMS x 4 Channels at 4
and 1% THD+N
Signal to Noise Ratio:
93dBA (reference: 1W into 4)