Stopping Boat (F4, F6); Stopping Engine; Procedure - Yamaha F2.5 Owner's Manual

Hide thumbs Also See for F2.5:
Table of Contents

Advertisement

Operation
EMU39882

Stopping boat (F4, F6)

EWM02321
WARNING
Do not use the reverse function to slow
down or stop the boat as it could cause
you to lose control, be ejected, or impact
the load or other parts of the boat. This
could increase the risk of serious injury. It
could also damage the shift mechanism.
The boat is not equipped with a separate
braking system. Water resistance stops it af-
ter the throttle lever is moved back to idle. The
stopping distance varies depending on gross
weight, water surface conditions, and wind di-
rection.
EMU27821

Stopping engine

Before stopping the engine, first let it cool off
for a few minutes at idle or low speed. Stop-
ping the engine immediately after operating at
high speed is not recommended.
EMU43493

Procedure

F2.5
1.
Push and hold the engine stop button un-
til the engine stops completely.
2.
After stopping the engine, close the air
vent valve and fuel cock.
60
1
1. Air vent valve
TIP:
The engine can also be stopped by pulling the
engine shut-off cord and removing the clip
from the engine shut-off switch.
F4, F6
1.
Push and hold the engine stop button un-
til the engine stops completely. The en-
gine can also be stopped by pulling the
engine shut-off cord and removing the
clip from the engine shut-off switch.
1
ZMU07626

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

F4F6

Table of Contents